Abstract:Nodal joints uniting separate elements of steel structures are the most important parts of the whole structure. For the tensile zone of a connection, the study of its stress-strain state up to the limit of exhaustion of its bearing capacity is of greatest interest. There exist different design approaches to obtain the ultimate capacity of a tension-zone of a steel joint, both numerical and analytical methods. In the presented paper this has been realized using a general-purpose finite element analysis package. The application of numerical methods for modelling the tensile performance of the T-component makes it possible to compensate for the lack of data on full-scale experimental studies. Despite the widespread use of finite element analysis packages, there are still no clear guidelines for creating numerical models of such connections. Numerical analysis has taken into account important effects such as the nonlinear behavior of the material and the contact interaction of its individual elements. Finite element analyses should represent the reality in an accurate way while not being too time consuming to be set up and run. That means appropriate parameters and phenomena, such as element types or loading procedure, should be compiled in a way suitable to the problem at hand, so that the discrepancy between reality and model is sufficiently small. A FE-model with wrong representation of reality can be solved correctly with FEA, but will thereby provide inaccurate results. Therefore, one needs understanding about FE parameters and their influence on time to execute the procedure effectively. When these conditions are met, the possibility to analyze larger number of T-stubs with less user modification opens up. The analytical method for the calculation of the properties of a bolted joint established by the structural Eurocodes proposes the T-stub as a component for the characterization of the tension and compression zones in moment joints. Using the component method, which is the basis for the calculation of joints according to the EN 1993-1-8 design codes, the value of the ultimate tensile force for the T-shaped component of the dimensions adopted in the work was obtained; the obtained values of the ultimate forces were further used in the numerical experiment. Keywords: end-plate connection, numerical model, T-stub component, bolt connection.

A Multi-Spring Component Modelling Approach for T-Stub Connections

Modeling of Steel Bolted T-Stub Connection under Large Deformation Condition

A Ductility-Centred Analytical Model for Axially Restrained Double-Span Steel Beam Systems Subjected to Sudden Columns Loss

Component Modeling of Steel Bolted End-Plate Joints under Bending and Shearing Loads

FINITE ELEMENT ANALYSIS OF STIFFENED T-STUB CONNECTIONS

Study on the Component-Based Model of Semi-Rigid Beam-to-column Joints Initial Stiffness

An Axial Semi-Rigid Connection Model for Cross-Type Transverse Branch Plate-to-chs Joints

Tensile Behavior of Novel Column-to-column Connection for Modular Steel Construction Using High-Strength Bolts

Strut-And-Tie Model Research On Bridge Column-Pile-Footing

Component-based model of semi-rigid connections for nonlinear analysis of composite structures

An Improved and Robust Finite Element Model for Simulation of Thin-Walled Steel Bolted Connections

An Investigation of the Effect of Semi-rigid Connections on Sudden Column Removal in Steel Frames

T-STUB COMPONENT BEHAVIOR OF THE BEAM TO COLUMN BOLTED FLANGE CONNECTION BASED ON A NUMERICAL ANALYSIS AND EN 1993-1-8 DESIGN CODES

Nonlinear Finite Element Analysis of Dynamic Characteristics of Semi-rigid Frames with Concrete-filled Steel Tubular Columns

3D modelling of concrete tunnel segmental joints and the development of a new bolt-spring model

Hysteretic model and numerical simulation method of T-shaped SRC column–steel beam joints

Experimental and numerical investigation on the column-beam connection in the corrugated steel plate-concrete composite frame

Progressive Collapse Mechanism Analysis of Concrete-Filled Square Steel Tubular Column to Steel Beam Joint with Bolted–Welded Hybrid Connection

Numerical assessment of T-stub component subjected to impact loading

Effect of Stiffeners on Mechanical Behavior of T-Stubs Based on Experiment and Numerical Simulations

Modeling and Parametric Study of Beam-to-column Connection for Self-Centering Steel Moment Frames