Abstract:In low and moderate seismic regions, low-ductility concentrically braced frames (CBFs) are widely used as the seismic force-resisting system for steel structures. The capacity-based design method is not required for such systems, i.e. no individual component in the lateral load carrying path is explicitly designated to sustain plastic deformations under seismic loading. Such CBFs are referred to as conventional CBFs (CCBFs) in this paper. Prior studies have revealed that, in CCBFs, the brace-to-gusset connections are inherently weaker in tension than the adjoining braces and gusset plates. Therefore, the accurate numerical modelling of the brace connections is critical for the reliable seismic evaluation of CCBFs. However, few research publications address the inelastic bolted brace connection modelling necessary for the structural analyses of these braced frame systems. In this paper, an efficient inelastic numerical modelling method, comprising the component-based modelling concept, is proposed for bolted brace connections. The accuracy of the numerical model is validated through comparison with laboratory test results of full-scale I-shape brace connection specimens. Eight single-storey CCBFs with the symmetric diagonal bracing configuration were designed and modeled. The nonlinear static and dynamic analyses revealed that: 1) although the buckling of the middle column at small storey drifts resulted in substantial lateral strength deterioration, a secondary seismic mechanism provided stable resistance to prevent collapse; 2) when loaded in tension, the brace connections deformed more than the braces; 3) stronger brace connections resulted in higher structural lateral stiffness and triggered earlier buckling of the middle column; 4) stronger brace connections possessed higher frictional energy-dissipating capacity which reduced the maximum storey drift.

Component-based model of semi-rigid connections for nonlinear analysis of composite structures

A Multi-Spring Component Modelling Approach for T-Stub Connections

Bio-based Connections and Hybrid Planar Truss

A Ductility-Centred Analytical Model for Axially Restrained Double-Span Steel Beam Systems Subjected to Sudden Columns Loss

Nonlinear Finite-Element Analysis of the Seismic Behavior of RC Column–Steel Beam Connections with Shear Failure Mode

An Axial Semi-Rigid Connection Model for Cross-Type Transverse Branch Plate-to-chs Joints

Influence of high-strength bolted end-plate connections in composite frames

EXPERIMENTAL INVESTIGATION AND NONLINEAR FINITE ELEMENT ANALYSIS ON THE BEHAVIOR OF CONCRETE-FILLED SQUARE STEEL TUBULAR COLUMN CONNECTIONS

An Improved and Robust Finite Element Model for Simulation of Thin-Walled Steel Bolted Connections

Study on the Component-Based Model of Semi-Rigid Beam-to-column Joints Initial Stiffness

Computational modelling of postbuckling behavior of composite T-stiffened panels with different bonding methods

Nonlinear Finite Element Analysis of Dynamic Characteristics of Semi-rigid Frames with Concrete-filled Steel Tubular Columns

Component-based model for bolted brace connections in conventional concentrically braced frames

An Investigation of the Effect of Semi-rigid Connections on Sudden Column Removal in Steel Frames

Lateral resistance of multi-story modular buildings using tenon-connected inter-module connections

Compound-element Modeling Accounting for Semi-Rigid Connections and Member Plasticity

Component method based rotation performance and design method for the connection in ATLS modular house

Experimental and Nonlinear Analytical Studies on Prefabricated Timber–Concrete Composite Structures with Crossed Inclined Coach Screw Connections

Parametric Analysis and Stiffness Investigation of Extended End-Plate Connection

Static And Seismic Experiments And Analysis Models Of Blind Bolted End Plate Joints To Cft Columns

Modeling and Parametric Study of Beam-to-column Connection for Self-Centering Steel Moment Frames