Abstract:This paper describes the development of a finite element numerical model with the ability to simulate and analyse the mechanical behaviour of different types of beam–column end-plate connections in which all of the bolts are pretensioned. The general purpose ANSYS software forms the basis of the modelling and its new functions are used to simulate the interface between the end plate and the column flange, as well as the pretension force in the bolts. Modelling of this kind has hitherto not been reported. The finite element model is compared with test results, which verify that the numerical procedure can simulate and analyse the overall and detailed behaviour of a number of types of bolt-pretensioned end-plate connections and components accurately, including the generation of the moment–rotation (M–ϕ) relationship, the contact status between the end-plate and the column flange, the behaviour of the end plate, the panel zone and bolts, and the influences of the bolt pretension force. Moreover, the numerical model also provides some additional useful results which are difficult to measure during testing, including the distribution of the pressure and frictional forces between the end plate and column flange induced by the bolt pretension and the moment at the joint, and the principal stress flow in the connections. This knowledge provides a basis for developing mechanical models consistent with the Eurocode component method of joint design. The validated numerical model is used for additional parametric finite element analyses of a number of beam-to-column bolt-pretensioned end-plate connections so as to produce a comprehensive study of their behaviour.

Component Modeling of Steel Bolted End-Plate Joints under Bending and Shearing Loads

Modeling of Steel Bolted T-Stub Connection under Large Deformation Condition

A Multi-Spring Component Modelling Approach for T-Stub Connections

A Ductility-Centred Analytical Model for Axially Restrained Double-Span Steel Beam Systems Subjected to Sudden Columns Loss

Experimental Research on Seismic Behavior of Reinforced Concrete Column-to-Steel Beam Joints with Bolted End-plate

Seismic Behavior of Exterior Connections with Steel Beams Bolted to Cft Columns

Design Approach of Stiffeners in Extended End Plate Connections and Finite Element Analysis

Experimental Evaluation of Steel Beam Bolted to Reinforced Concrete Column Connections

Effects of End-plate Stiffener on Behavior of Extended End-plate Beam-to-column Connections

Study on the Component-Based Model of Semi-Rigid Beam-to-column Joints Initial Stiffness

Numerical Modelling and Design of Stainless Steel Double Extended End-Plate Beam-to-Column Joints

Numerical Simulation of Steel Pretensioned Bolted End-Plate Connections of Different Types and Details

Experimental and theoretical analysis of the moment–rotation behaviour of stiffened extended end-plate connections

Numerical Simulation And Experimental Study On Bolted End-Plate Connections

Parametric Analysis of End-Plate Joint in Hybrid Strength Steel Frame Subjected to Static Loads

Moment-rotation Curves of Ultra-Large Capacity End-Plate Joints Based on Component Method

Finite Element Analysis Of Cyclic Loading Behaviour Of End-Plate Connections

Analysis on the Initial Rotational Stiffness of End-plate Beam-to-column Composite Joint

Parametric Analysis and Stiffness Investigation of Extended End-Plate Connection

Relationship Between Moment and Rotation Angle of Composite Joints of Steel Frames with Flush End-Plate Connections

An assessment of application of the component-based method to full range behaviour of joints between steel beam to concrete filled steel tube columns under extreme loading conditions