Abstract:Nodal joints uniting separate elements of steel structures are the most important parts of the whole structure. For the tensile zone of a connection, the study of its stress-strain state up to the limit of exhaustion of its bearing capacity is of greatest interest. There exist different design approaches to obtain the ultimate capacity of a tension-zone of a steel joint, both numerical and analytical methods. In the presented paper this has been realized using a general-purpose finite element analysis package. The application of numerical methods for modelling the tensile performance of the T-component makes it possible to compensate for the lack of data on full-scale experimental studies. Despite the widespread use of finite element analysis packages, there are still no clear guidelines for creating numerical models of such connections. Numerical analysis has taken into account important effects such as the nonlinear behavior of the material and the contact interaction of its individual elements. Finite element analyses should represent the reality in an accurate way while not being too time consuming to be set up and run. That means appropriate parameters and phenomena, such as element types or loading procedure, should be compiled in a way suitable to the problem at hand, so that the discrepancy between reality and model is sufficiently small. A FE-model with wrong representation of reality can be solved correctly with FEA, but will thereby provide inaccurate results. Therefore, one needs understanding about FE parameters and their influence on time to execute the procedure effectively. When these conditions are met, the possibility to analyze larger number of T-stubs with less user modification opens up. The analytical method for the calculation of the properties of a bolted joint established by the structural Eurocodes proposes the T-stub as a component for the characterization of the tension and compression zones in moment joints. Using the component method, which is the basis for the calculation of joints according to the EN 1993-1-8 design codes, the value of the ultimate tensile force for the T-shaped component of the dimensions adopted in the work was obtained; the obtained values of the ultimate forces were further used in the numerical experiment. Keywords: end-plate connection, numerical model, T-stub component, bolt connection.

Effect of Stiffeners on Mechanical Behavior of T-Stubs Based on Experiment and Numerical Simulations

Demand on Stiffeners in Stiffened Extended End-Plate Connections

FINITE ELEMENT ANALYSIS OF STIFFENED T-STUB CONNECTIONS

Modeling of Steel Bolted T-Stub Connection under Large Deformation Condition

A Multi-Spring Component Modelling Approach for T-Stub Connections

Design Approach of Stiffeners in Extended End Plate Connections and Finite Element Analysis

Effects of End-plate Stiffener on Behavior of Extended End-plate Beam-to-column Connections

Experimental and numerical study on compressive behavior of welded hollow spherical joints with external stiffeners

Stub Column Tests of Thin-Walled Complex Section with Intermediate Stiffeners

Experimental study and numerical simulation of seismic performance of stiffened thin steel plate shear walls considering the effect of vertical load on frame column

STIFFENER STIFFNESS AND ELASTIC BUCKLING STRESS OF STEEL PLATE SHEAR WALL

Test Analysis of Stiffened T-stub Connections

Compression Tests Of Cold-Formed Steel C- And Z-Sections With Different Stiffeners

A study on the stability bearing capacity of fastener-style tubular steel formwork-supports

Tensile behavior of cruciform stubs with staggered bolt patterns

LOCAL BUCKLING OF THIN-WALLED HIGH STRENGTH STEEL COLUMNS WITH WEB STIFFENERS

Design of Cold-Formed Steel Built-Up Closed Sections with Intermediate Stiffeners

Test and finite element analysis of end-plate stiffeners for extended end-plate connections

Cold-Formed Steel Built-Up Closed Sections With Intermediate Stiffeners

T-STUB COMPONENT BEHAVIOR OF THE BEAM TO COLUMN BOLTED FLANGE CONNECTION BASED ON A NUMERICAL ANALYSIS AND EN 1993-1-8 DESIGN CODES

Internal Force Transfer Mechanism and Bearing Capacity of Vertical Stiffener Joints in CFDST Structures