Abstract:Graphene nanoplatelets (GNPs) have been considered as ideal nano-reinforcements for magnesium matrix composites (MMCs) owing to their excellent mechanical properties. It is necessary to develop efficient fabrication method for reality application of GNPs reinforced MMCs. Here, AZ91D magnesium alloy-graphene nanoplatelets (AZ91D-GNPs) composites were fabricated by thixomolding process for the first time. OM, SEM, EDS, HRTEM, XRD, and Raman spectroscopy were used for characterization of the composites. GNPs were well-dispersed in the Mg matrix and a strong interfacial bonding had been formed between GNPs and alloy matrix. Based on response surface methodology, quadratic prediction models had been developed for the ultimate tensile strength (UTS), elongation (δ), Vickers hardness (HV) and porosity (P) of composites, respectively. The interaction effects between two explanatory variables, the content of GNPs (C) and the barrel temperature (TB), on microstructure and mechanical properties of composites were investigated using dimensional response surface. The optimization for thixomolding process was investigated using “Numerical optimization process”. The optimal UTS, δ, HV and P achieved for AZ91D-GNPs composites were 38.4%, 85.7%, 29.9%, and 33.3% higher than those obtained for AZ91D magnesium alloy, respectively. The utilized preparation technology is a very promising technique for mass-scale production and application of GNPs reinforced MMCs.

Fabrication of Zn Alloy Foam Via Powder Metallurgical Approach

Fabrication of Cellular Zn–Mg Alloy Foam by Gas Release Reaction Via Powder Metallurgical Approach

Fabrication of Mg-Al Alloy Foam with Close-Cell Structure by Powder Metallurgy Approach and Its Mechanical Properties

Fabrication of Cu-Mg alloy foam with close pore structure by gas release reaction powder metallurgical approach

Fabrication of Cellular Mg Alloy by Gas Release Reaction Via Powder Metallurgical Approach

Low-Temperature Fabrication of Porous Mg-Zn Foams by a Reactive Sintering Powder Metallurgy Approach

Preparation principle and compression properties of cellular Mg–Al–Zn alloy foams fabricated by the gas release reaction powder metallurgy approach

Low-Temperature Reactive Sintered Porous Mg-Al-Zn Alloy Foams

Fabrication of Al Foam Without Thickening Process Through Melt-Foaming Method

Reactive sintering principle and compressive properties of porous AZ91 magnesium alloy foams produced by powder metallurgy approach

Performance Assessment on the Manufacturing of Zn-22Al-2Cu Alloy Foams Using Barite by Melt Route

Effect of Zinc Content on the Mechanical Properties of Closed-Cell Aluminum Foams

Effect of Grain Size on the Mechanical Properties of Mg Foams

Optimization of Cellular Structure of Aluminum Foams Produced by Powder Metallurgy Method

Development of AZ91D Magnesium Alloy-Graphene Nanoplatelets Composites Using Thixomolding Process

Effect of Aluminium Content and Processing Parameters on the Microstructure and Mechanical Properties of Laser Powder-Bed Fused Magnesium-Aluminium (0, 3, 6, 9wt%) Powder Mixture

Fabrication of ZAMAK 2 alloys by powder metallurgy process

Fabrication of Uniform and Rounded Closed-Cell Aluminum Foams Using Novel Foamable Precursor Particles (FPPs)

Foamability and mechanical properties of in situ submicron MgAl2O4p/Al composite foams by ultrasonic method

Fabrication and Effect of Mg–Zn Solid Solution Via Zn Foil Interlayer Alloying in FSW Process of Magnesium Alloy

Fabrication of Aluminum Foams with Small Pore Size by Melt Foaming Method