Abstract:The resistive random access memory (RRAM) crossbar array has been extensively studied as one of the most promising candidates for future high-density nonvolatile memory technology. However, some problems caused by circuit and device interaction, such as sneak leakage paths, result in limited array size and large power consumption, which degrade the array performance significantly. Thus, the analysis on circuit and device interaction issue is imperative. In this paper, a simulation method is developed to investigate the critical issues correlated with the interaction between devices and the circuit. The simulations show that a large off/on ratio of resistance states of RRAM is beneficial for large readout margin (i.e., array size). The existence of the selector connected in series with an RRAM device can eliminate the need for high Ron resistance, which is critical for the array consisted of only RRAM cells. The readout margin is more sensitive to the variation of Ron and is determined by the nonlinearity of the I-V characteristics of RRAM, whereas the nonlinear characteristics of the selector device are beneficial for a larger readout margin. An optimal design scheme for turn-on voltage and conductance of the selector is proposed based on the simulation.

Very Low-Programming-Current RRAM with Self-Rectifying Characteristics

A novel self-selection bipolar RRAM cell with ultra-low operation currents for cross-point application

16-Layer 3D Vertical RRAM with Low Read Latency (18ns), High Nonlinearity (>5000) and Ultra-low Leakage Current (~pa) Self-Selective Cells

A Self-Compliance Rram Device for High Density Cross-Point Array Applications

1S1R Device with Self-Compliance Property for High Density Cross-Point Memory Applications

Super non-linear RRAM with ultra-low power for 3D vertical nano-crossbar arrays.

A cold-electrode metal–oxide resistive random access memory

A Self-Terminated Operation Scheme for High-Parallel and Energy-Efficient Forming of RRAM Array

Performance Improvements by SL-Current Limiter and Novel Programming Methods on 16MB RRAM Chip

RRAM Crossbar Array With Cell Selection Device: A Device and Circuit Interaction Study

Application of twin-bit self-rectifying via RRAM with unique diode state in cross-bar arrays by advanced CMOS Cu BEOL process

Record Low-Power Organic RRAM With Sub-20-nA Reset Current

Complementary Metal Oxide Semiconductor Compatible Hf-Based Resistive Random Access Memory with Ultralow Switching Current/Power

Fully CMOS Compatible 3D Vertical RRAM with Self-Aligned Self-Selective Cell Enabling Sub-5Nm Scaling

A 28nm 1.5mb Embedded 1T2R RRAM with 14.8 Mb/mm2 Using Sneaking Current Suppression and Compensation Techniques

ASAP: an Efficient and Reliable Programming Algorithm for Multi-level RRAM Cell

Demonstration of 3D vertical RRAM with ultra low-leakage, high-selectivity and self-compliance memory cells

Ta0x/Hf02-based RRAM with Self-Selective Feature Caused by Current Compliance Modulation

A Highly Reliable and Low-Power Cross-Coupled 18T SRAM Cell

Retracted Article: High Uniformity and Improved Nonlinearity by Embedding Nanocrystals in Selector-Less Resistive Random Access Memory

Self-compliance and High-Performance GeTe-based CBRAM with Cu Electrode