Abstract:Asymmetric hot rolling was used to fabricate the high-strength Mg-9Gd-4Y–1Zn-0.8Mn (wt.%) alloys, which is strengthened by the lamellar long-period stacking ordered (LPSO) phases inside grains and the block-shaped LPSO phases surrounding grain boundaries. The reduction in total thickness shows a significant impact on the microstructure, texture, and mechanical properties of the alloy sheets. By keeping the velocity ratio between the top and lower rollers at 1.3, the shear strain is introduced all across the sheet thickness. The as-rolled sample exhibits a bimodal-grained structure made up of fine recrystallized (DRXed) grains with relatively random orientation and coarse elongated non-recrystallized (unDRXed) grains with intense basal texture and profuse substructure. As rolling strain increases, the volume fraction of the DRXed region and the basal texture intensity of the unDRXed region gradually increase. The dominating prismatic slip as well as the moderate basal slip and pyramidal slip are activated during rolling. The triggering of prismatic slip, among the activated multiple slip systems, results in the development of [101¯0]//RD texture component at high strains. The alloy sheet that underwent severer rolling strain (56.3%R sample) shows higher ultimate tensile strength (411 MPa) and tensile yield strength (348 MPa) but lower elongation to failure (3.5%). The dominant strengthening mechanisms for the preferable mechanical properties should be grain boundary strengthening of fine DRXed grains, texture strengthening of coarse elongated unDRXed grains, short-fiber strengthening of block-shaped LPSO phases, and dispersion strengthening of profuse lamellar LPSO phases and dense tiny Mg5(Gd, Y) particles.

Dynamic Precipitation, Microstructure and Mechanical Properties of Mg-5Zn-1Mn Alloy Sheets Prepared by High Strain-Rate Rolling

Dynamic recrystallization, texture and mechanical properties of high Mg content Al–Mg alloy deformed by high strain rate rolling

Microstructures evolution, texture characteristics and mechanical properties of Mg-2.5Nd-0.5Zn-0.5Zr alloy during the high strain rate hot-rolling

Enhancing the Mechanical Properties of High Strain Rate Rolled Mg–6Zn–1Mn Alloy by Pre-Rolling

Microstructure Evolution and Mechanical Properties of the ZM61 Alloy Sheets under Different Pre-Rolling and High Strain Rate Rolling Temperatures

Development of the Fine-Grained Mg-0.6Zr Sheets with Enhanced Damping Capacity by High Strain Rate Rolling

Microstructure Evolution and Mechanical Properties of Mg-3al-3sn-1zn Alloy During Multi-Pass High-Speed Rolling

Deformation Induced Dynamic Recrystallization and Precipitation Strengthening in an Mg-Zn-Mn Alloy Processed by High Strain Rate Rolling

Improving the Mechanical Properties of a ZM61 Magnesium Alloy by Pre-Rolling and High Strain Rate Rolling

Dynamic recrystallization behaviors of high Mg alloyed Al-Mg alloy during high strain rate rolling deformation

Microstructure and Mechanical Anisotropy of the Hot Rolled Mg-8.1al-0.7zn-0.15ag Alloy

Achieving High Strength in Micro-alloyed Mg-Al-Ca-Zn-Mn-Ce Alloy Sheet Processed by Single-Pass Large-Strain Rolling

Dynamic precipitation and twinning-induced dynamic recrystallization in Mg–6Al–3Sn–1Zn alloy during multi-pass high-speed rolling

Microstructure and Mechanical Properties of Mg-Gd-Y-Zn-Mn Alloy Sheets Processed by Large-Strain High-Efficiency Rolling

Microstructure Evolution and Mechanical Properties of High-Strength Mg-Gd-Y-Zn-Mn Alloy Processed by Asymmetric Hot Rolling

Developing High-Strength and Ductile Mg-Gd-Y-Zn-Zr Alloy Sheet Via Bimodal Grain Structure Coupling with Heterogeneously-Distributed Precipitates

Bimodal-Structured Al–Mg Alloy with High Strength and Ductility Processed by High Strain Rate Rolling at Medium Temperature

Prominent Role of High-Volume Fraction Mg17Al12 Dynamic Precipitations on Multimodal Microstructure Formation and Strength-Ductility Synergy of Mg–Al–Zn Alloys Processed by Hard-Plate Rolling (HPR)

Effect of rolling temperature on microstructure and mechanical properties of hot-rolled Mg-Al-Ca-Zn-Mn alloys

High Strength and Large Ductility of a Fine-Grained Al–Mg Alloy Processed by High Strain Rate Hot Rolling and Cold Rolling

Microstructure and mechanical property of multi-pass low-strain rolled Mg-Al-Zn-Mn alloy sheet