Abstract:Tungsten(VI) oxide (WO3) with excellent charge transport properties and intrinsic thermal and chemical robustness is a promising anode interface material instead of PEDOT:PSS in organic solar cells (OSCs). Herein, a solution-processed, ultraviolet-irradiation-derived WO3 film as anode interface layer (AIL) is developed based on tungsten(VI) chloride (WCl6) as precursor. The WO3 film is derived from the solution-processed precursor film with simple ultraviolet-irradiation treatment, and the preparation process without high-temperature annealing is very compatible with large-scale production and flexible substrate. The composition of the WO3 film is analyzed by X-ray photoelectron spectroscopy. ITO modified by the WO3 film, namely ITO/WO3, exhibits similarly high optical transmittance as that of bare ITO. The work function of ITO/WO3 measured by ultraviolet photoelectron spectroscopy is obviously lower than that of bare ITO, which can facilitate effective holes extraction. In addition, the WO3 film possesses relatively smooth and hydrophobic surface, beneficial to form excellent interface contact with active layer. Moreover, non-fullerene OSCs based on the WO3 film as AIL are studied with typical and relatively low-cost PBDB-T:ITIC as active layer. The optimal efficiency (8.70%) of the device based on ITO/WO3 is dramatically higher than that (3.32%) of the device based on bare ITO, and comparable to that (8.80%) of the device based on ITO/PEDOT:PSS. Therefore, the solution-processed, ultraviolet-irradiation-derived WO3 film as AIL should have great potential to realize high-performance non-fullerene OSCs, which can also inspire a novel and promising route to prepare other transition metal oxide films in optoelectronic devices.

An Aqueous Solution-Processed CuOX Film As an Anode Buffer Layer for Efficient and Stable Organic Solar Cells

CuBi2O4/CuO Heterojunction Coated with Electrodeposited ZnO Overlayer for Stable Solar Hydrogen Evolution

Aqueous Solution‐processed NiOx Anode Buffer Layers Applicable for Polymer Solar Cells

Solution-Processed Copper Iodide As an Inexpensive and Effective Anode Buffer Layer for Polymer Solar Cells

New Method for Preparing ZnO Layer for Efficient and Stable Organic Solar Cells

Application of Buffer Layer to Improve the Efficiency of Organic Solar Cells

Sb2o3 Anode Buffer Induced Morphology Improvement in Small Molecule Organic Solar Cells

Solution-processed CuOx As an Efficient Hole-Extraction Layer for Inverted Planar Heterojunction Perovskite Solar Cells

Fabrication of ZnO interface layer from a novel aqueous sol-gel precursor solution for organic solar cells

Designed Polar Cosolvent‐Prepared Zinc Oxide Film for Efficient and Stable Inverted Organic Solar Cells

A Cost‐Effective, Aqueous‐Solution‐Processed Cathode Interlayer Based on Organosilica Nanodots for Highly Efficient and Stable Organic Solar Cells

A solution-processed, ultraviolet-irradiation-derived WO3 film as anode interface layer for high-performance non-fullerene organic solar cells

Water‐Induced Formation of α‐MoO 3 Microcrystals as Anode Buffer Layer for Highly Efficient Polymer Solar Cells

Non-Halogenated Solvents Processed Efficient ITO-Free Flexible Organic Solar Cells with Upscaled Area

Enhanced efficiency of inverted polymer solar cells by using solution-processed TiOx/CsOx cathode buffer layer

The characteristics of the small molecule organic solar cells with PEDOT:PSS/LiF double anode buffer layer system

Organic Solar Cells with 2-Thenylmercaptan/au Self-Assembly Film As Buffer Layer

Enhanced Efficiency of Organic Solar Cells by Using a ZnO-Fe2O3 Electron Transport Layer

Efficient and stable organic solar cells based on all-solution-processed metal oxide transport layers

Research Progress on Inorganic Buffer Layer Materials in Organic-Inorganic Hybrid Solar Cells

Photoresponse Enhancement of Cu2O Solar Cell with Sulfur-Doped ZnO Buffer Layer to Mediate the Interfacial Band Alignment