Abstract:The intrinsic properties of PEDOT: PSS are regulated by adding molybdenum‐containing semiconductors (MoO3 and MoS2). The MoO3‐PEDOT: PSS and MoS2‐PEDOT: PSS solutions exhibit lower acidity, while their thin films show improved conductivity and enhanced electron‐blocking ability. With the modified PEDOT: PSS layer, organic solar cells composed of PM6:Y6 and PM6:L8‐BO achieve champion power conversion efficiencies of 18.0% and 18.9%, respectively. Anode interlayers play critical roles in organic solar cells, impacting the electrode's work function, energy level alignment, hole extraction, and electrode surfaces. However, the development of the commonly used anode interlayer PEDOT:PSS lags behind the rapid development of organic solar cells due to its low conductivity, acidity, and poor electron‐blocking capabilities. Herein, an innovative strategy is proposed to regulate the intrinsic properties of PEDOT:PSS by incorporating molybdenum‐containing semiconductors (MoO3, MoS2), which is validated using the state‐of‐the‐art active layer consisting of PM6:Y6 in conventional devices. The addition of molybdenum‐containing semiconductors alters the aggregation morphology of the PEDOT:PSS layer, increasing its conductivity and reducing its acidity. Furthermore, the hole extraction and electron‐blocking ability are improved by changing the work function of the anode with the influence of the deep energy level and by forming a trap energy level to capture electrons. Consequently, when the interlayer is employed, a champion power conversion efficiency of 17.1% in the PM6:Y6 devices and 18.9% in organic solar cells composed of PM6:L8‐BO is achieved. The results, which enhance the intrinsic properties of PEDOT:PSS with molybdenum‐containing semiconductors, offer valuable guidelines for engineering anode interlayers to fabricate highly efficient non‐fullerene organic solar cells.

The characteristics of the small molecule organic solar cells with PEDOT:PSS/LiF double anode buffer layer system

Investigation on the small molecular organic solar cells with PEDOT:PSS/ZnPc double anode buffer layer system

Mixing plasmonic Au nanoparticles into all polymer layers for improving the efficiency of organic solar cells

Sb2o3 Anode Buffer Induced Morphology Improvement in Small Molecule Organic Solar Cells

Organic Solar Cells with 2-Thenylmercaptan/au Self-Assembly Film As Buffer Layer

[6,6]-Phenyl-C61-butyric acid dimethylamino ester as a cathode buffer layer for high-performance polymer solar cells

High Performance Planar P-I-N Perovskite Solar Cells With Crown-Ether Functionalized Fullerene And Lif As Double Cathode Buffer Layers

An Organic Semiconductor As an Anode-Buffer for the Improvement of Small Molecular Photovoltaic Cells

Crown-Ether Functionalized Fullerene As A Solution-Processable Cathode Buffer Layer For High Performance Perovskite And Polymer Solar Cells

Enhancement of the Efficiency and Stability of Planar P-I-n Perovskite Solar Cells Via Incorporation of an Amine-Modified Fullerene Derivative As a Cathode Buffer Layer

Dual-interface modification effect of Carbon Quantum Dots on the performance of Polymer Solar Cells

18.9% Efficiency Binary Organic Solar Cells Enabled by Regulating the Intrinsic Properties of PEDOT:PSS

Improved Performance of Small Molecule Solar Cell by Using Oblique Deposition Technique and Zinc Phthalocyanine Cathode Buffer Layer

Solution-Processed Copper Iodide As an Inexpensive and Effective Anode Buffer Layer for Polymer Solar Cells

Small-Molecule Organic Solar Cells with Improved Stability

Interfacial Processes in Small Molecule Organic Solar Cells

Improving the electrical performance of inverted perovskite solar cell with LiF anode buffer layer

Performance Enhancement of Organic Solar Cells by Adding a Liquid Crystalline Molecule in Cathode and Anode Interlayers

An anode buffer layer with size-controlled Ag nanoparticles for polymer solar cells with improved efficiencies

Research Progress on Inorganic Buffer Layer Materials in Organic-Inorganic Hybrid Solar Cells

Highly Efficient Organic Solar Cells Enabled by the Incorporation of a Sulfonated Graphene Doped PEDOT:PSS Interlayer