Abstract:Fullerene derivatives, especially [6,6]-phenyl-C<sub>61</sub>-butyric acid methyl ester (PCBM), have been widely applied as electron transport layers of inverted planar heterojunction perovskite solar cells (PSCs). However, the solution-processed PCBM capping layer suffers from limited surface wetting which hinders the improvement in efficiency and scalability of PSCs. Herein, we develop a facile hybrid solvent strategy that enables very fast wetting of the PCBM capping layer atop of the perovskite surface, leading to an improved interfacial contact and electron transport. The significantly enhanced wettability of the PCBM solution fulfilled through blending isopropyl alcohol into the commonly used chlorobenzene (CB) is attributed to the reduced surface tension while retaining viscosity. As a result, the electron mobility and electric conductivity of the PCBM capping layer increase by around two times, and the PSC devices exhibit the highest power conversion efficiency (PCE) of 19.92%, which is improved by ∼18% relative to that of the control device (16.78%). Importantly, this strategy is also applicable for other alcohols (ethanol and methanol) and CB blends. Moreover, the fast wetting approach enables us to deposit the PCBM capping layer using a facile drop-casting method, affording comparable PCEs to those obtained by the conventional spin-coating method, which is not achievable by using the conventional single solvent. This fast wetting PCBM capping layer also contributes to efficiency improvement of large-area (1 cm<sup>2</sup>) devices. These advances hold great potential for other scalable deposition methods such as blade-coating and slot-die coating.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c11164?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c11164</a>.Videos of the 0.15IPA:CB hybrid solvent, pure CB, and pure IPA dropped onto perovskite films (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c11164/suppl_file/am0c11164_si_001.zip">ZIP</a>)Contact angles of different solvents over time; surface tensions and viscosities; cross-sectional SEM images; UV–vis absorption spectra of PCBM films; electron mobility characterization; analysis of time-resolved PL spectra; statistic photovoltaic parameters; photovoltaic parameters in different scan directions; steady-state photocurrent output; EQE spectra; photovoltaic parameters of large-area devices; ambient stability of PSC device; and photovoltaic parameters of devices using other alcohol solvents and replacing PCBM with another fullerene derivative (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c11164/suppl_file/am0c11164_si_002.pdf">PDF</a>)This article has not yet been cited by other publications.

Enhancement of the Efficiency and Stability of Planar P-I-n Perovskite Solar Cells Via Incorporation of an Amine-Modified Fullerene Derivative As a Cathode Buffer Layer

High Performance Planar P-I-N Perovskite Solar Cells With Crown-Ether Functionalized Fullerene And Lif As Double Cathode Buffer Layers

Crown-Ether Functionalized Fullerene As A Solution-Processable Cathode Buffer Layer For High Performance Perovskite And Polymer Solar Cells

Enhanced Performance and Light Soaking Stability of Planar Perovskite Solar Cells Using an Amine-Based Fullerene Interfacial Modifier

[6,6]-Phenyl-c61-butyric Acid 2-((2-(dimethylamino)ethyl)(methyl)amino)-ethyl Ester As an Acceptor and Cathode Interfacial Material in Polymer Solar Cells

[6,6]-Phenyl-C61-butyric acid dimethylamino ester as a cathode buffer layer for high-performance polymer solar cells

Efficient perovskite/fullerene planar heterojunction solar cells with enhanced charge extraction and suppressed charge recombination.

Improved Performance and Air Stability of Planar Perovskite Solar Cells Via Interfacial Engineering Using a Fullerene Amine Interlayer

Improving the Performance of Low-Temperature Planar Perovskite Solar Cells by Adding Functional Fullerene End-Capped Polyethylene Glycol Derivatives

Enhanced Indoor Perovskite Solar Cells: Mitigating Interface Defects and Charge Transport Losses with Polyarene‐Based Hole‐Selective Layers

All-Inorganic Perovskite Solar Cells with Tetrabutylammonium Acetate as the Buffer Layer between the SnO 2 Electron Transport Film and CsPbI 3

Zn0.8Cd0.2S@PCBM Hybrid As an Efficient Electron Transport Layer for Air‐Processed P‐i‐n Planar Perovskite Solar Cells: Improvement of Interfacial Electron Transfer and Device Stability

Engineering of Electron Extraction and Defect Passivation Via Anion-Doped Conductive Fullerene Derivatives As Interlayers for Efficient Invert Perovskite Solar Cells.

Efficient and Stable Perovskite Solar Cells by B-Site Compositional Engineered All-Inorganic Perovskites and Interface Passivation

Bifacial Modified Charge Transport Materials for Highly Efficient and Stable Inverted Perovskite Solar Cells

Self-Organized Fullerene Interfacial Layer for Efficient and Low-Temperature Processed Planar Perovskite Solar Cells with High Uv-Light Stability

Improving Moisture/Thermal Stability and Efficiency of CH3NH3PbI3‐Based Perovskite Solar Cells Via Gentle Butyl Acrylate Additive Strategy

Lowering the dielectric mismatch for efficient inverted perovskite solar cells through incorporating cyano-functionalized fullerene additive

Fulleropyrrolidinium Iodide As an Efficient Electron Transport Layer for Air-Stable Planar Perovskite Solar Cells

Fast Wetting of a Fullerene Capping Layer Improves the Efficiency and Scalability of Perovskite Solar Cells

Synergistic enhancement of efficiency and stability of perovskite solar cells via dual interface modification