Abstract:Fullerene derivatives, especially [6,6]-phenyl-C<sub>61</sub>-butyric acid methyl ester (PCBM), have been widely applied as electron transport layers of inverted planar heterojunction perovskite solar cells (PSCs). However, the solution-processed PCBM capping layer suffers from limited surface wetting which hinders the improvement in efficiency and scalability of PSCs. Herein, we develop a facile hybrid solvent strategy that enables very fast wetting of the PCBM capping layer atop of the perovskite surface, leading to an improved interfacial contact and electron transport. The significantly enhanced wettability of the PCBM solution fulfilled through blending isopropyl alcohol into the commonly used chlorobenzene (CB) is attributed to the reduced surface tension while retaining viscosity. As a result, the electron mobility and electric conductivity of the PCBM capping layer increase by around two times, and the PSC devices exhibit the highest power conversion efficiency (PCE) of 19.92%, which is improved by ∼18% relative to that of the control device (16.78%). Importantly, this strategy is also applicable for other alcohols (ethanol and methanol) and CB blends. Moreover, the fast wetting approach enables us to deposit the PCBM capping layer using a facile drop-casting method, affording comparable PCEs to those obtained by the conventional spin-coating method, which is not achievable by using the conventional single solvent. This fast wetting PCBM capping layer also contributes to efficiency improvement of large-area (1 cm<sup>2</sup>) devices. These advances hold great potential for other scalable deposition methods such as blade-coating and slot-die coating.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c11164?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c11164</a>.Videos of the 0.15IPA:CB hybrid solvent, pure CB, and pure IPA dropped onto perovskite films (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c11164/suppl_file/am0c11164_si_001.zip">ZIP</a>)Contact angles of different solvents over time; surface tensions and viscosities; cross-sectional SEM images; UV–vis absorption spectra of PCBM films; electron mobility characterization; analysis of time-resolved PL spectra; statistic photovoltaic parameters; photovoltaic parameters in different scan directions; steady-state photocurrent output; EQE spectra; photovoltaic parameters of large-area devices; ambient stability of PSC device; and photovoltaic parameters of devices using other alcohol solvents and replacing PCBM with another fullerene derivative (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c11164/suppl_file/am0c11164_si_002.pdf">PDF</a>)This article has not yet been cited by other publications.

High Performance Planar P-I-N Perovskite Solar Cells With Crown-Ether Functionalized Fullerene And Lif As Double Cathode Buffer Layers

Enhancement of the Efficiency and Stability of Planar P-I-n Perovskite Solar Cells Via Incorporation of an Amine-Modified Fullerene Derivative As a Cathode Buffer Layer

Crown-Ether Functionalized Fullerene As A Solution-Processable Cathode Buffer Layer For High Performance Perovskite And Polymer Solar Cells

Improving the Performance of Low-Temperature Planar Perovskite Solar Cells by Adding Functional Fullerene End-Capped Polyethylene Glycol Derivatives

Enhanced Performance and Light Soaking Stability of Planar Perovskite Solar Cells Using an Amine-Based Fullerene Interfacial Modifier

All-Inorganic Perovskite Solar Cells with Tetrabutylammonium Acetate as the Buffer Layer between the SnO 2 Electron Transport Film and CsPbI 3

Efficient perovskite/fullerene planar heterojunction solar cells with enhanced charge extraction and suppressed charge recombination.

High Performance Perovskite Solar Cells Based on Multifunctional Additives of Crown‐Ether‐Iodine Supra‐Molecules

Double-site defect passivation of perovskite film via fullerene additive engineering toward highly efficient and stable bulk heterojunction solar cells

Enhanced Indoor Perovskite Solar Cells: Mitigating Interface Defects and Charge Transport Losses with Polyarene‐Based Hole‐Selective Layers

Improved Performance and Air Stability of Planar Perovskite Solar Cells Via Interfacial Engineering Using a Fullerene Amine Interlayer

Cross‐Linkable Fullerene Electron Transport Layer with Internal Encapsulation Capability for Efficient and Stable Inverted Perovskite Solar Cells

High-efficiency (>20%) planar carbon-based perovskite solar cells through device configuration engineering

Fast Wetting of a Fullerene Capping Layer Improves the Efficiency and Scalability of Perovskite Solar Cells

Engineering of Electron Extraction and Defect Passivation Via Anion-Doped Conductive Fullerene Derivatives As Interlayers for Efficient Invert Perovskite Solar Cells.

Lowering the dielectric mismatch for efficient inverted perovskite solar cells through incorporating cyano-functionalized fullerene additive

Cyclic Multi‐Site Chelation for Efficient and Stable Inverted Perovskite Solar Cells

Novel Insight into the Function of PC61BM in Efficient Planar Perovskite Solar Cells

Designing Conductive Fullerenes Ionene Polymers As Efficient Cathode Interlayer to Improve Inverted Perovskite Solar Cells Efficiency and Stability

Bifacial Modified Charge Transport Materials for Highly Efficient and Stable Inverted Perovskite Solar Cells

Fulleropyrrolidinium Iodide As an Efficient Electron Transport Layer for Air-Stable Planar Perovskite Solar Cells