Abstract:PEDOT:PSS – the most widely used hole transport layer (HTL) in organic solar cells – is found to induce local p‐doping near the HTL interface inside the photoactive layer, resulting in photocurrent loss. This loss can be mitigated by adding a self‐assembled monolayer of 2PACz on PEDOT:PSS, ultimately improving the device performance. Poly(3,4‐ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) has been one of the most established hole transport layers (HTL) in organic solar cells (OSCs) for several decades. However, the presence of PSS− ions is known to deteriorate device performance via a number of mechanisms including diffusion to the HTL‐active layer interface and unwanted local chemical reactions. In this study, it is shown that PSS− ions can also result in local p‐doping in the high efficiency donor:non‐fullerene acceptor blends – resulting in photocurrent loss. To address these issues, a facile and effective approach is reported to improve the OSC performance through a two‐component hole transport layer (HTL) consisting of a self‐assembled monolayer of 2PACz ([2‐(9H‐Carbazol‐9‐yl)ethyl]phosphonic acid) and PEDOT:PSS. The power conversion efficiency (PCE) of 17.1% using devices with PEDOT:PSS HTL improved to 17.7% when the PEDOT:PSS/2PACz two‐component HTL is used. The improved performance is attributed to the overlaid 2PACz layer preventing the formation of an intermixed p‐doped PSS− ion rich region (≈5–10 nm) at the bulk heterojunction‐HTL contact interface, resulting in decreased recombination losses and improved stability. Moreover, the 2PACz monolayer is also found to reduce electrical shunts that ultimately yield improved performance in large area devices with PCE enhanced from 12.3% to 13.3% in 1 cm2 cells.

Organic Solar Cells with 2-Thenylmercaptan/au Self-Assembly Film As Buffer Layer

Mixing plasmonic Au nanoparticles into all polymer layers for improving the efficiency of organic solar cells

Organic Solar Cell Based on Alkylthiol/Au Self-assembly Film As Buffer Layer

Self‐organized anode interlayer enables PEDOT: PSS free structure for thick‐film organic solar cells over 16% efficiency

Self‐Organized Anode Interlayer Enables PEDOT:PSS‐Free Structure for Thick‐Film Organic Solar Cells over 16% Efficiency

Organic Solar Cell Based on Poly(2-Methoxy, 5-(2'-ethylhexyloxy)-1,4-phenylene Vinylene) As an Electron Donating Material

Enhancing the performance of organic solar cells by modification of cathode with a self-assembled monolayer of aromatic organophosphonic acid

In-situ self-organized anode interlayer enables organic solar cells with simultaneously simplified processing and greatly improved efficiency to 17.8%

18.62%‐Efficiency Binary Organic Solar Cells with a PEDOT1:PSS2.80 Buffer Layer

Investigation on the small molecular organic solar cells with PEDOT:PSS/ZnPc double anode buffer layer system

Sub-nanometer atomic layer deposited Al2O3 barrier layer for improving stability of nonfullerene organic solar cells

High Efficiency over 18.6% of Organic Solar Cells Enabled by PEDOT:PSS/Br-2PACz Dual-Anode Interface

Significant Enhancement in Built-In Potential and Charge Carrier Collection of Organic Solar Cells Using 4-(5-hexylthiophene-2-yl)-2,6-bis(5-trifluoromethyl)thiophen-2-yl)pyridi Ne As A Cathode Buffer Layer

Highly Efficient Organic Solar Cells Enabled by the Incorporation of a Sulfonated Graphene Doped PEDOT:PSS Interlayer

The characteristics of the small molecule organic solar cells with PEDOT:PSS/LiF double anode buffer layer system

An Inorganic Molecule-Induced Electron Transfer Complex for Highly Efficient Organic Solar Cells

Mitigating Detrimental Effect of Self‐Doping Near the Anode in Highly Efficient Organic Solar Cells

Simplified Fabrication of High-Performance Organic Solar Cells Through the Design of Self-Assembling Hole-Transport Molecules

Chapter 8 Interface Engineering and Electrode Engineering for Organic Solar Cells

Novel Nonconjugated Polymer As Cathode Buffer Layer for Efficient Organic Solar Cells

Ultrathin Anode Buffer Layer for Enhancing Performance of Polymer Solar Cells