Abstract:TiO2 sols synthesized with a facile solution-based method were used as a buffer layer between the active layer and the cathode Al in conventional structure polymer solar cells (PSCs). Using transmission electron microscopy (TEM), selected area electron diffraction (SAED), X-ray diffraction (XRD) and atomic force microscopy (AFM), the morphological and crystallographic properties of synthesized TiO2 nanoparticles (TiO2 NPs) as well as the buffer layer were studied in detail. It was observed that by increasing H2O in the process of peptization both the crystallinity and particle size of TiO2 NPs were enhanced, while the particles in sol showed a narrower size distribution conformed by dynamic light scattering. Inserting TiO2 NPs as a buffer layer in conventional structure PSCs, both the power conversion efficiency (PCE) and stability were improved dramatically. PSCs based on the structure of ITO/PEDOT:PSS/P3HT:PCBM/TiO2 NPs/Al showed the short-circuit current (Jsc) of 12.83 mA/cm2 and the PCE of 4.24%, which were improved by 31% and 37%, respectively comparing with the reference devices without a TiO2 buffer layer. The stability measurement showed that PSC devices with a TiO2 NPs buffer layer could retain 80% of the original PCEs after exposed in air for 200 h, much better than the devices without such a buffer layer. The effect can be attributed to the protection by the buffer layer against oxygen and H2O diffusion into the active layers. The observations indicate that TiO2 NPs synthesized by facile solution-based method have great potential applications in PSCs, especially for large-area printed PSCs.

Water‐Induced Formation of α‐MoO 3 Microcrystals as Anode Buffer Layer for Highly Efficient Polymer Solar Cells

is method to prepare a molybdenum oxide hole-transporting layer for e ffi cient polymer solar cells

Improved Performance for Polymer Solar Cells Using CTAB-modified MoO3 As an Anode Buffer Layer

Efficient Polymer Photovoltaic Cells Using Solution-Processed MoO3 As Anode Buffer Layer

An Ultraviolet‐Deposited MoO3 Film As Anode Interlayer for High‐Performance Polymer Solar Cells

Highly efficient low-bandgap polymer solar cells with solution-processed and annealing-free phosphomolybdic acid as hole-transport layers.

High Alcohol-Soluble MoOx Gel for Interfacial Layer in Organic Solar Cells

Aqueous Solution‐processed NiOx Anode Buffer Layers Applicable for Polymer Solar Cells

Annealing-free alcohol-processable MoO anode interlayer enables efficient light utilization in organic photovoltaics

Low-temperature Solution-Processed Molybdenum Oxide Thin Film As ITO Modified Layer for Polymer Solar Cells

Annealing-free Alcohol-Processable MoO X Anode Interlayer Enables Efficient Light Utilization in Organic Photovoltaics

Molybdenum-Oxide-Modified PEDOT:PSS as Efficient Hole Transport Layer in Perovskite Solar Cells

Effects of Molybdenum Oxide Anode Buffer Layer on Performance of Organic Solar Cells

Dramatic improvement in the stability and mechanism of high-performance inverted polymer solar cells featuring a solution-processed buffer layer

Enhanced Efficiency and Stability of Polymer Solar Cells with TiO2 Nanoparticles Buffer Layer

Novel Nonconjugated Polymer As Cathode Buffer Layer for Efficient Organic Solar Cells

Boosted efficiency of conductive metal oxide-free pervoskite solar cells using poly[3-(4-methylamincarboxylbutyl)thiophene] buffer layers

Enhanced open-circuit voltages and efficiencies: the role of oxidation state of molybdenum oxide buffer layer in polymer solar cells

MoO3–Au Composite Interfacial Layer for High Efficiency and Air-Stable Organic Solar Cells

Low-temperature, solution-processed hole selective layers for polymer solar cells.

The Improved Performance of Solution-Processed SQ:PC71BM Photovoltaic Devices Via MoO3 As the Anode Modification Layer