Abstract:The intrinsic properties of PEDOT: PSS are regulated by adding molybdenum‐containing semiconductors (MoO3 and MoS2). The MoO3‐PEDOT: PSS and MoS2‐PEDOT: PSS solutions exhibit lower acidity, while their thin films show improved conductivity and enhanced electron‐blocking ability. With the modified PEDOT: PSS layer, organic solar cells composed of PM6:Y6 and PM6:L8‐BO achieve champion power conversion efficiencies of 18.0% and 18.9%, respectively. Anode interlayers play critical roles in organic solar cells, impacting the electrode's work function, energy level alignment, hole extraction, and electrode surfaces. However, the development of the commonly used anode interlayer PEDOT:PSS lags behind the rapid development of organic solar cells due to its low conductivity, acidity, and poor electron‐blocking capabilities. Herein, an innovative strategy is proposed to regulate the intrinsic properties of PEDOT:PSS by incorporating molybdenum‐containing semiconductors (MoO3, MoS2), which is validated using the state‐of‐the‐art active layer consisting of PM6:Y6 in conventional devices. The addition of molybdenum‐containing semiconductors alters the aggregation morphology of the PEDOT:PSS layer, increasing its conductivity and reducing its acidity. Furthermore, the hole extraction and electron‐blocking ability are improved by changing the work function of the anode with the influence of the deep energy level and by forming a trap energy level to capture electrons. Consequently, when the interlayer is employed, a champion power conversion efficiency of 17.1% in the PM6:Y6 devices and 18.9% in organic solar cells composed of PM6:L8‐BO is achieved. The results, which enhance the intrinsic properties of PEDOT:PSS with molybdenum‐containing semiconductors, offer valuable guidelines for engineering anode interlayers to fabricate highly efficient non‐fullerene organic solar cells.

Annealing-free Alcohol-Processable MoO X Anode Interlayer Enables Efficient Light Utilization in Organic Photovoltaics

Annealing-free alcohol-processable MoO anode interlayer enables efficient light utilization in organic photovoltaics

Annealing-Insensitive, Alcohol-Processed MoO x Hole Transport Layer for Universally Enabling High-Performance Conventional and Inverted Organic Solar Cells

Water‐Induced Formation of α‐MoO 3 Microcrystals as Anode Buffer Layer for Highly Efficient Polymer Solar Cells

Undoped MoO X with Oxygen-rich Vacancies as Hole Transport Material for Efficient Indoor/Outdoor Organic Solar Cells

Room-temperature solution-processed molybdenum oxide as a hole transport layer with Ag nanoparticles for highly efficient inverted organic solar cells

Low-temperature, solution-processed molybdenum oxide hole-collection layer for organic photovoltaics

MoOx Hole Collection Layer for A-Si: H Based Photovoltaic Cells

Solution-processed Molybdenum Oxide Hole Transport Layer Stabilizes Organic Solar Cells

Controllable synthesis and n-doping of HMoOx nanoparticle inks through simple photoreduction for solution-processed organic photovoltaics

Electro-optical performance of molybdenum oxide modified aluminum doped zinc oxide anodes in organic light emitting diodes: A comparison to indium tin oxide

18.9% Efficiency Binary Organic Solar Cells Enabled by Regulating the Intrinsic Properties of PEDOT:PSS

Efficient and stable organic solar cells based on all-solution-processed metal oxide transport layers

Disordered Nano‐Hemisphere Molybdenum Trioxide for Enhanced Light Out‐Coupling in Organic Light‐Emitting Diodes

Facile solution-processed molybdenum oxide as hole transporting material for efficient organic solar cell

Solution-processed molybdenum oxide films by low-temperature annealing for improved silicon surface passivation

Optimization of a Molybdenum Oxide Bilayer Facilitating Hole Transfer in the p/i Interface for Transparent Thin-Film Silicon Solar Cells and Modules Using Laser Scribing

A Novel Annealing‐Free Amorphous Inorganic Metal Oxyhydroxide Cathode Interlayer for Efficient and Stable Inverted Perovskite Solar Cells

A simple synthesis method to prepare a molybdenum oxide hole-transporting layer for efficient polymer solar cells