Abstract:By spin-coating a surfactant layer, glycerol monostearate (GMS) atop poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) film, a PEDOT:PSS/surfactant bilayer film was prepared facilely for the first time and applied as the transparent anode for high-efficiency ITO-free bulk heterojunction polymer solar cell (BHJ-PSC) devices. A significant improvement of the conductivity of PEDOT: PSS films (from similar to 1 S cm(-1) to more than 1000 S cm(-1)) was achieved by GMS modification and the highest conductivity reaches 1019 S cm(-1) for Clevios PH 1000 under an optimized spin-coating speed of GMS layer. The Clevios PH 1000/GMS bilayer film exhibits a sheet resistance of 98 U sq(-1) and a transparency of around 80% in the visible range, which are comparable to those of ITO, fulfilling its function as the transparent anode. The conductivity improvement by GMS modification is proposed to result from the GMS-induced segregation of PSS chains and the conformational change of the conductive PEDOT chains within PEDOT: PSS. While the highly hydrophobic -(CH2)(16)CH3 groups of GMS preferentially interact with the hydrophobic PEDOT of PEDOT: PSS, the highly hydrophilic -COOCH2-CHOH-CH2OH groups preferentially interact with the hydrophilic PSS chains with the hydroxyl groups playing an important role on the consequent phase separation between PEDOT and PSS chains. Using Clevios PH 1000/GMS bilayer films as the transparent anodes replacing ITO, high-efficiency ITO-free BHJ-PSC devices based on poly[N-9 "-hepta-decanyl-2,7-carbazole-alt-5,5-(4',7'-di-2-thienyl-2',1',3'-benzothiadiazole) (PCDTBT) blended with [6,6]-phenyl C-71-butyric acid methyl ester (PC71BM) (PCDTBT:PC71BM) and thieno[3,4-b]-thiophene/benzodithiophene (PTB7):PC71BM systems exhibit power conversion efficiencies (PCE) of 5.90% and 7.06%, respectively, which are comparable to the corresponding devices based on the traditional ITO anode.

Boosted efficiency of conductive metal oxide-free pervoskite solar cells using poly[3-(4-methylamincarboxylbutyl)thiophene] buffer layers

Metal Organic Framework Doped Spiro-OMeTAD with Increased Conductivity for Improving Perovskite Solar Cell Performance

PEDOT:PSS‐Free Polymer Non‐Fullerene Polymer Solar Cells with Efficiency up to 18.60% Employing a Binary‐Solvent‐Chlorinated ITO Anode

Molybdenum-Oxide-Modified PEDOT:PSS as Efficient Hole Transport Layer in Perovskite Solar Cells

High-efficiency ITO-free polymer solar cells using highly conductive PEDOT:PSS/surfactant bilayer transparent anodes

High-performance, Stable and Low-Cost Mesoscopic Perovskite (ch3nh3pbi3) Solar Cells Based on Poly(3-Hexylthiophene)-modified Carbon Nanotube Cathodes

Back interface management by multifunctional composite carbon nanospheres electrode for efficient and stable HTL-free carbon-based perovskite solar cells

ETL-Free Perovskite Solar Cells with an Efficiency of 19.81% in Open Air

Efficiently Improving the Stability of Inverted Perovskite Solar Cells by Employing Polyethylenimine-Modified Carbon Nanotubes As Electrodes.

Ultrathin chromium oxide buffer layer by reactive thermal deposition for high-performance semitransparent perovskite solar cells

High efficiency of 19% for stable perovskite solar cells fabrication under ambient environment using “conductive polymer adhesive”

Highly Efficient Organic/Silicon Hybrid Solar Cells with a MoO3 Capping Layer

HxMoO3-y nanobelts: an excellent alternative to carbon electrodes for high performance mesoscopic perovskite solar cells

Conductivity Enhancement of PEDOT:PSS Film Via Sulfonic Acid Modification: Application As Transparent Electrode for ITO-free Polymer Solar Cells

Deciphering the Reduced Loss in High Fill Factor Inverted Perovskite Solar Cells with Methoxy-Substituted Poly(Triarylamine) as the Hole Selective Contact

Work Function Tuning of Carbon Electrode to Boost the Charge Extraction in Hole Transport Layer‐Free Perovskite Solar Cells

Indium Tin Oxide-Free Polymer Solar Cells Using A Pedot:Pss/Ag/Pedot:Pss Multilayer As A Transparent Anode

H <sub>x</sub>MoO <sub>3-Y</sub> Nanobelts: An Excellent Alternative to Carbon Electrode for High Performance Mesoscopic Perovskite Solar Cells

Multi-functional interface modulation through thiol functionalized covalent organic frameworks for efficient and durable perovskite solar cells

Simultaneously Enhancing the Efficiency and Stability of Perovskite Solar Cells by Using P3HT/PEDOT:PSS as a Double Hole Transport Layer

High‐Performance ITO‐Free Perovskite Solar Cells Enabled by Single‐Walled Carbon Nanotube Films