Abstract:Solution-processed organic-inorganic hybrids composing of MoO3 nanoparticles and PEDOT:PSS were developed for use in inverted organic solar cells as hole transporting layer (HTL). The hybrid MoO3:PEDOT:PSS inks were prepared by simply mixing PEDOT:PSS aqueous and MoO3 ethanol suspension together. A core-shell structure was proposed in the MoO3:PEDOT:PSS hybrid ink, where PEDOT chains act as the core and MoO3 nanoparticles connected with PSS chains act as the composite shell. The mixing with PEDOT:PSS suppressed the aggregation of MoO3 nanoparticles, which led to a smoother surface. In addition, since the hydrophilic PSS chains were passivated through preferentially connection with MoO3, the stronger adhesion between MoO3 nanoparticles and the photoactive layer improved the film forming ability of the MoO3:PEDOT:PSS hybrid ink. The MoO3:PEDOT:PSS hybrid HTL can therefore be feasibly deposited onto the hydrophobic photoactive polymer layer without any surface treatment. The use of the MoO3:PEDOT:PSS hybrid HTL resulted in the optimized P3HT:PC61BM- and PTB7:PC61BM-based inverted organic solar cells reaching highest power conversion efficiencies of 3.29% and 5.92%, respectively, which were comparable with that of the control devices using thermally evaporated MoO3 HTL (3.05% and 6.01%, respectively). Furthermore, less HTL thickness dependence of device performance was found for the hybrid HTL-based devices, which makes it more compatible with roll-to-roll printing process. In the end, influence of the blend ratio of MoO3 to PEDOT:PSS on photovoltaic performance and device stability was studied carefully, results indicated that the device performance would decrease with the increase of MoO3 blended ratio, whereas the long-term stability was improved.

Low-temperature Solution-Processed Molybdenum Oxide Thin Film As ITO Modified Layer for Polymer Solar Cells

is method to prepare a molybdenum oxide hole-transporting layer for e ffi cient polymer solar cells

Light illumination intensity dependence of photovoltaic parameter in polymer solar cells with ammonium heptamolybdate as hole extraction layer.

Low-temperature, solution-processed hole selective layers for polymer solar cells.

Solution-processed Molybdenum Oxide Hole Transport Layer Stabilizes Organic Solar Cells

MoOx Hole Collection Layer for A-Si: H Based Photovoltaic Cells

A Wide Temperature Tolerance, Solution-Processed MoOx Interface Layer for Efficient and Stable Organic Solar Cells

Solution-Processed Mosx Thin-Films As Hole-Transport Layers for Efficient Polymer Solar Cells

An Ultraviolet‐Deposited MoO3 Film As Anode Interlayer for High‐Performance Polymer Solar Cells

High Alcohol-Soluble MoOx Gel for Interfacial Layer in Organic Solar Cells

Low-temperature, solution-processed molybdenum oxide hole-collection layer for organic photovoltaics

Molybdenum Oxide Particles Doped in Hole Transport Layer to Enhance the Efficiency of Flexible Polymer Solar Cells

Thermally-Evaporated Moo3 And Solution-Processed Pedot:Pss Dual Hole Transport Layer Towards Efficient Planar Perovskite Solar Cells

Undoped Moox with Oxygen-Rich Vacancies As Hole Transport Material for Efficient Indoor/Outdoor Organic Solar Cells

Solution-Processed MoO3:PEDOT:PSS Hybrid Hole Transporting Layer for Inverted Polymer Solar Cells

Photoelectric Conversion and Device Stability of PM6:PY-IT Solar Cells Based on a Water Solution-Processed MoO3 Hole Transport Layer

Molybdenum-Oxide-Modified PEDOT:PSS as Efficient Hole Transport Layer in Perovskite Solar Cells

Solution Processed Hybrid Graphene-MoO3 Hole Transport Layers for Improved Performance of Organic Solar Cells

Effect of an Ultra-thin Molybdenum Trioxide Layer and Illumination Intensity on the Performance of Organic Photovoltaic Devices

Undoped MoO X with Oxygen-rich Vacancies as Hole Transport Material for Efficient Indoor/Outdoor Organic Solar Cells