Abstract:The intrinsic properties of PEDOT: PSS are regulated by adding molybdenum‐containing semiconductors (MoO3 and MoS2). The MoO3‐PEDOT: PSS and MoS2‐PEDOT: PSS solutions exhibit lower acidity, while their thin films show improved conductivity and enhanced electron‐blocking ability. With the modified PEDOT: PSS layer, organic solar cells composed of PM6:Y6 and PM6:L8‐BO achieve champion power conversion efficiencies of 18.0% and 18.9%, respectively. Anode interlayers play critical roles in organic solar cells, impacting the electrode's work function, energy level alignment, hole extraction, and electrode surfaces. However, the development of the commonly used anode interlayer PEDOT:PSS lags behind the rapid development of organic solar cells due to its low conductivity, acidity, and poor electron‐blocking capabilities. Herein, an innovative strategy is proposed to regulate the intrinsic properties of PEDOT:PSS by incorporating molybdenum‐containing semiconductors (MoO3, MoS2), which is validated using the state‐of‐the‐art active layer consisting of PM6:Y6 in conventional devices. The addition of molybdenum‐containing semiconductors alters the aggregation morphology of the PEDOT:PSS layer, increasing its conductivity and reducing its acidity. Furthermore, the hole extraction and electron‐blocking ability are improved by changing the work function of the anode with the influence of the deep energy level and by forming a trap energy level to capture electrons. Consequently, when the interlayer is employed, a champion power conversion efficiency of 17.1% in the PM6:Y6 devices and 18.9% in organic solar cells composed of PM6:L8‐BO is achieved. The results, which enhance the intrinsic properties of PEDOT:PSS with molybdenum‐containing semiconductors, offer valuable guidelines for engineering anode interlayers to fabricate highly efficient non‐fullerene organic solar cells.

Enhanced open-circuit voltages and efficiencies: the role of oxidation state of molybdenum oxide buffer layer in polymer solar cells

Water‐Induced Formation of α‐MoO 3 Microcrystals as Anode Buffer Layer for Highly Efficient Polymer Solar Cells

Efficient and Stable of Perovskite Solar Cells

Solution-processed Molybdenum Oxide Hole Transport Layer Stabilizes Organic Solar Cells

Solution preparation of molybdenum oxide on graphene: a hole transport layer for efficient perovskite solar cells with a 1.12 V high open-circuit voltage

Tuning oxygen vacancies in vanadium-doped molybdenum oxide for silicon solar cells with hole selective contact

Bandgap Tunable Zn1‐xMgxO Thin Films as Highly Transparent Cathode Buffer Layers for High‐Performance Inverted Polymer Solar Cells

Efficient and stable organic solar cells based on all-solution-processed metal oxide transport layers

Holistic Dielectric and Buffer Interfacial Layers Enable High-Efficiency Perovskite Solar Cells and Modules

A graphene oxide/oxygen deficient molybdenum oxide nanosheet bilayer as a hole transport layer for efficient polymer solar cells

Dramatic improvement in the stability and mechanism of high-performance inverted polymer solar cells featuring a solution-processed buffer layer

Molybdenum-Oxide-Modified PEDOT:PSS as Efficient Hole Transport Layer in Perovskite Solar Cells

Molybdenum Oxide Particles Doped in Hole Transport Layer to Enhance the Efficiency of Flexible Polymer Solar Cells

Study of molybdenum oxide optimized hole carrier transport in perovskite solar cells

An Impressive Open-Circuit Voltage of 1.223 V and High Humidity Stability of Perovskite Solar Cells with MgO Buffer Layer Deposited by Low-Temperature Atomic Layer Deposition

Physically and Chemically Stable Molybdenum-Based Composite Electrodes for P-I-n Perovskite Solar Cells

18.9% Efficiency Binary Organic Solar Cells Enabled by Regulating the Intrinsic Properties of PEDOT:PSS

A highly efficient transition metal oxide layer for hole extraction and transport in inverted polymer bulk heterojunction solar cells

Enhancing performance of inverted polymer solar cells by an effective novel double layer combining MoO3 and PEIE

Undoped MoO X with Oxygen-rich Vacancies as Hole Transport Material for Efficient Indoor/Outdoor Organic Solar Cells