Abstract:Inverted polymer solar cells (PSCs) with high open-circuit voltages of 1.00-1.06 V are fabricated by using an indenofluorene-containing copolymer (PIFTBT8) as an electron donor material and [6,6]-phenyl-C71-butyric acid methyl ester (PC71BM) as an electron acceptor material. To improve the photovoltaic performance, interface control of various low-temperature processed ZnO films as cathode buffer layers is systematically investigated for effective electron transportation, while transition metal oxides including MoO3, WO3, NiO, and Cu2O are employed as anode buffer layers for hole-extraction. Incorporation of optimized semiconducting metal oxide interlayers can minimize interfacial power losses, which thus affords large open-circuit voltages (V-oc), increased short-circuit current densities (J(sc)), and fill factors (FF), eventually contributing to higher power conversion efficiencies (PCEs) as well as better device stability. Due to the improved interfacial contacts and fine-matching energy levels, inverted PSCs with a device configuration of ITO/ZnO/PIFTBT8:PC71BM/MoO3/Ag exhibit a high PCE of 5.05% with a large V-oc of 1.04 V, a J(sc) of 9.74 mA cm(-2), and an FF of 50.1%. For the single junction inverted PSCs with efficiencies over 5.0%, 1.04 V is the largest V-oc ever achieved. By controlling the processing conditions of the active layer, the V-oc can further be improved to 1.05 and 1.06 V, with PCEs of 4.70% and 4.18%, respectively. More importantly, the inverted PSCs are ascertained to maintain a PCE of 4.55% (>90% of its initial efficiency) and a V-oc, of 1.05 V over 180 days, demonstrating good long-term stability, which is much better than that of the conventional devices. The results suggest that the interface engineering of metal oxide interlayers is an important strategy to develop PSCs with good performance.

Enhancing performance of inverted polymer solar cells by an effective novel double layer combining MoO3 and PEIE

Enhanced Crystallization and Optimized Morphology of Perovskite through Doping Indium-Based Metal-Organic Assembly: Achieving Significant Solar Cell Efficiency Enhancements

A novel hole extraction layer to enhance the performance of inverted organic solar cells

Versatile electron-collecting interfacial layer by in situ growth of silver nanoparticles in nonconjugated polyelectrolyte aqueous solution for polymer solar cells

Efficiency improvement of inverted perovskite solar cells enabled by PTAA/MoS2 double hole transporters

Simultaneously Enhanced J(Sc) And Ff By Employing Two Solution-Processed Interfacial Layers For Inverted Planar Perovskite Solar Cells

Synergistic Enhancement of Charge Extraction and Heat Dissipation in Inverted Perovskite Solar Cells via n-Doped Top Interlayers

Performance improvement of polymer solar cells with binary additives induced morphology optimization and interface modification simultaneously

Enhanced Efficiency of Inverted Polymer Solar Cells Using Two-Step Sputtered ZnO As Cathode Interfacial Layer

Dramatic improvement in the stability and mechanism of high-performance inverted polymer solar cells featuring a solution-processed buffer layer

Highly efficient inverted polymer solar cells based on ethanolamine-treated indium tin oxide as cathode

Interface Control of Semiconducting Metal Oxide Layers for Efficient and Stable Inverted Polymer Solar Cells with Open-Circuit Voltages over 1.0 Volt

Highly efficient inverted polymer solar cells by using solution processed MgO/ZnO composite interfacial layers

Designing Conductive Fullerenes Ionene Polymers As Efficient Cathode Interlayer to Improve Inverted Perovskite Solar Cells Efficiency and Stability

Surface Regulation with Polymerized Small Molecular Acceptor Towards Efficient Inverted Perovskite Solar Cells

Bifacial Modified Charge Transport Materials for Highly Efficient and Stable Inverted Perovskite Solar Cells

Simultaneous improvement of efficiency and stability of inverted organic solar cell via composite hole transport layer

High-Efficiency Perovskite Solar Cells with Improved Interfacial Charge Extraction by Bridging Molecules

High Efficiency and Stability of Inverted Perovskite Solar Cells Using Phenethyl Ammonium Iodide-Modified Interface of NiOx and Perovskite Layers

Synergistic enhancement of efficiency and stability of perovskite solar cells via dual interface modification

Enhanced performance of perovskite solar cells with multifunctional organic interface conditioner