Abstract:Solution-processed organic-inorganic hybrids composing of MoO3 nanoparticles and PEDOT:PSS were developed for use in inverted organic solar cells as hole transporting layer (HTL). The hybrid MoO3:PEDOT:PSS inks were prepared by simply mixing PEDOT:PSS aqueous and MoO3 ethanol suspension together. A core-shell structure was proposed in the MoO3:PEDOT:PSS hybrid ink, where PEDOT chains act as the core and MoO3 nanoparticles connected with PSS chains act as the composite shell. The mixing with PEDOT:PSS suppressed the aggregation of MoO3 nanoparticles, which led to a smoother surface. In addition, since the hydrophilic PSS chains were passivated through preferentially connection with MoO3, the stronger adhesion between MoO3 nanoparticles and the photoactive layer improved the film forming ability of the MoO3:PEDOT:PSS hybrid ink. The MoO3:PEDOT:PSS hybrid HTL can therefore be feasibly deposited onto the hydrophobic photoactive polymer layer without any surface treatment. The use of the MoO3:PEDOT:PSS hybrid HTL resulted in the optimized P3HT:PC61BM- and PTB7:PC61BM-based inverted organic solar cells reaching highest power conversion efficiencies of 3.29% and 5.92%, respectively, which were comparable with that of the control devices using thermally evaporated MoO3 HTL (3.05% and 6.01%, respectively). Furthermore, less HTL thickness dependence of device performance was found for the hybrid HTL-based devices, which makes it more compatible with roll-to-roll printing process. In the end, influence of the blend ratio of MoO3 to PEDOT:PSS on photovoltaic performance and device stability was studied carefully, results indicated that the device performance would decrease with the increase of MoO3 blended ratio, whereas the long-term stability was improved.

A highly efficient transition metal oxide layer for hole extraction and transport in inverted polymer bulk heterojunction solar cells

Effect of Transition Metal Oxide Anode Interlayer in Bulk Heterojunction Solar Cells

Room-temperature solution-processed molybdenum oxide as a hole transport layer with Ag nanoparticles for highly efficient inverted organic solar cells

Optimal hole extraction performance in MoOx-incorporated PEDOT:PSS films for organic photovoltaics

Undoped Moox with Oxygen-Rich Vacancies As Hole Transport Material for Efficient Indoor/Outdoor Organic Solar Cells

An Alternative Hole Extraction Layer for Inverted Organic Solar Cells

Solution-Processed MoO3:PEDOT:PSS Hybrid Hole Transporting Layer for Inverted Polymer Solar Cells

Molybdenum Oxide Particles Doped in Hole Transport Layer to Enhance the Efficiency of Flexible Polymer Solar Cells

Facile solution-processed molybdenum oxide as hole transporting material for efficient organic solar cell

High Performance of Inverted Polymer Solar Cells with Cobalt Oxide As Hole-Transporting Layer

A novel hole extraction layer to enhance the performance of inverted organic solar cells

Undoped MoO X with Oxygen-rich Vacancies as Hole Transport Material for Efficient Indoor/Outdoor Organic Solar Cells

Metal oxide nanoparticles as an electron-transport layer in high-performance and stable inverted polymer solar cells.

Solution-processed Molybdenum Oxide Hole Transport Layer Stabilizes Organic Solar Cells

Spray-Coated Transition Metal Dichalcogenides as Hole Transport Layers in Inverted NFA-Based Organic Photovoltaics with Enhanced Stability under Solar and Artificial Light

Efficiency limits of Perovskite Solar Cells with Transition Metal Oxides as Hole Transport Layers

Molybdenum-Oxide-Modified PEDOT:PSS as Efficient Hole Transport Layer in Perovskite Solar Cells

Metal organic framework derived NiO x nanoparticles for application as a hole transport layer in perovskite solar cells

Molybdenum oxide hole selective transport layer by hot wire oxidation-sublimation deposition for silicon heterojunction solar cells