Abstract:To improve the morphology and charge transport property of zinc oxide (ZnO) interface layer in the field of organic solar cells (OSCs), a novel ZnO sol-gel precursor was developed by redox reaction among zinc powder (Zn), hydrogen peroxide (H2O2), and ammonia (NH3·H2O) in aqueous solvent. This aqueous ZnO sol-gel precursor has advantages in cost and stability. Furthermore, photoelectric conversion performance of OSCs with ZnO layer (aqueous) is better than that of device with ZnO layer (nonaqueous). To further elaborate the relevance between the ZnO interface layer and the device performance, optical and morphology characteristics of precursor solutions, ZnO layers, and active layers were studied. Meanwhile, electrical characteristics of the OSCs were also analyzed. The results show less anion and larger colloidal particle size in aqueous sol-gel solution, which making the ZnO interface layer have fewer defects and larger surface roughness than nonaqueous-phase prepared ZnO layer. Thus, free electron could transfer from the active layer to ZnO layer more easily, and charge recombination is reduced at the interface. Moreover, the electron mobility of OSCs is also enhanced by the aqueous-phase prepared ZnO layer. Therefore, short-circuit current and photoelectric conversion performance of device are promoted.

What problem does this paper attempt to address?

The paper primarily aims to address several key issues related to the zinc oxide (ZnO) interfacial layer in organic solar cells (OSCs), in order to enhance the photoelectric conversion efficiency and performance stability of the cells. Specifically, the paper proposes improvements in the following aspects: 1. **Environmental friendliness and cost issue**: Traditional ZnO precursor solutions use organic solvents such as 2-methoxyethanol and ethanolamine, which are harmful to the environment and human health, and are also expensive. The paper proposes a novel ZnO precursor solution based on an aqueous reaction system, using zinc powder, hydrogen peroxide, and ammonia as raw materials. This not only reduces costs but also improves environmental friendliness. 2. **Stability and ageing issue**: Traditional ZnO precursor solutions need to be used after a certain period of time to ensure optimal performance, and their performance decreases after a certain period of time. The newly proposed ZnO precursor solution exhibits excellent long-term stability, maintaining high performance even after storage for 20 days, greatly improving practicality and economy. 3. **Film defects issue**: ZnO films prepared from standard precursors may contain various defects, affecting the performance of the solar cells. By using ZnO layers prepared with the new formula, these defects can be reduced, thereby reducing charge recombination losses at the interface and enhancing electron transfer capability. 4. **Improvement of photoelectric conversion efficiency**: By optimizing the morphology and charge transfer characteristics of the ZnO interfacial layer, the short-circuit current density (JSC) of OSCs is significantly increased, thereby enhancing the overall photoelectric conversion efficiency. Experimental results show that OSC devices with the newly prepared ZnO layers using the novel aqueous method exhibit higher power conversion efficiency, especially when using precursor solutions stored for 20 days, the efficiency further increases to 12.33%. In summary, the paper solves the issues of environmental friendliness, cost, stability, and film quality of traditional ZnO precursor solutions by developing a novel ZnO precursor solution, significantly improving the photoelectric conversion efficiency and performance stability of OSCs, and providing important advancement for the practical application of organic photovoltaic devices.

Fabrication of ZnO interface layer from a novel aqueous sol-gel precursor solution for organic solar cells

Enhanced Efficiency of Organic Solar Cells by Using a ZnO-Fe2O3 Electron Transport Layer

New Method for Preparing ZnO Layer for Efficient and Stable Organic Solar Cells

Manipulation of Zinc Oxide with Zirconium Doping for Efficient Inverted Organic Solar Cells

Li-Doped ZnO Electron Transport Layer for Improved Performance and Photostability of Organic Solar Cells

Designed Polar Cosolvent‐Prepared Zinc Oxide Film for Efficient and Stable Inverted Organic Solar Cells

Organosilica Nanodots Doped ZnO Cathode Interface Layer for Highly Efficient and Stable Inverted Polymer Solar Cells

Application of NADH- modified ZnO electron transport layer in high performance organic solar cells

High performance ZnO cathode interface doped by organic electrolyte and inorganic metal ion for organic solar cells

Core-Shell ZnO@SnO2 Nanoparticles for Efficient Inorganic Perovskite Solar Cells.

Healing the Degradable Organic–inorganic Heterointerface for Highly Efficient and Stable Organic Solar Cells

A Cost‐Effective, Aqueous‐Solution‐Processed Cathode Interlayer Based on Organosilica Nanodots for Highly Efficient and Stable Organic Solar Cells

Characterization of ZnO Interlayers for Organic Solar Cells: Correlation of Electrochemical Properties with Thin-Film Morphology and Device Performance

Realizing 18.03% Efficiency and Good Junction Characteristics in Organic Solar Cells via Hydrogen-bonding Interaction between Glucose and ZnO Electron Transport Layer

Dual‐Use Self‐Assembled Monolayer Controlling Charge Carrier Extraction in Organic Solar Cells

One-Step Preparation of ZnO Electron Transport Layers Functionalized with Benzoic Acid Derivatives

An Efficient and Stable Inverted Structure Organic Solar Cell Using ZnO Modified by 2D ZrSe2 as a Composite Electron Transport Layer

Low-Temperature Solution-Processed Zinc Tin Oxide Film As a Cathode Interlayer for Organic Solar Cells.

Cathode Interface Layer Based on Organosilica Nanodots for Efficient and Stable Inverted Organic Solar Cells

An Efficient Interface Modification Material for Improved Efficiency and Stability in Inverted Organic Solar Cells