Abstract:In past decades, organic solar cells (OSCs) have attracted much attention due to their advantages such as light weight, flexibility, variable color, adjustable band gap and roll-to-roll (R2R) manufacturing. Recently, the certificated power conversion efficiency (PCE) of single-junction OSCs has exceeded 18%, showing great potential for commercial applications. The outstanding performance of OSCs strongly depends on innovative research on the synthesis of efficient active materials. However, essential interfacial modification is also very critical because it can not only benefit charge extraction and transportation, but also effectively protect the active materials and thus improving the device performance. Therefore, various interfacial materials have been investigated intensively for highly efficient OSCs. Zinc oxide (ZnO) nanomaterials with excellent optoelectronic properties are considered to be one of the most promising candidates for electron transport layers (ETLs) of R2R printed OSCs. However, ETLs of the most common ZnO nanoparticles (NPs) inevitably have plenty of surface defects due to their high surface to volume ratio, which impairs the carrier transportation and collection. To address this concern, in this work, a composite film of ETL is designed for OSCs using the mixture of ZnO nanorods (NRs) and ZnO NPs. ZnO NRs with hexagonal crystal structure are synthesized by the solvothermal method and characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM) and scanning electron microscopy (SEM). The results show that the intensity of diffraction peak (002) of ZnO NRs was significantly higher than that of diffraction peak (101) and peak (101), indicating that nanorods grow along the c-axis orientation. It is also found that the diameter and length of well-crystallized ZnO NRs range from 5 to 8 nm and from 15 to 40 nm, respectively. The ZnO NRs are introduced as the electron transport material for OSCs with the structure of ITO/PEDOT:PSS/PM6:Y7/ZnO NPs/ZnO NPs:NRs/Al. The prepared ZnO NRs are blended with ZnO NPs to achieve an optimal surface morphology of the ETL and enhanced light capture capability of the device. ETLs with different ratios of ZnO NRs to ZnO NPs are prepared. When the mass ratio of ZnO NRs reaches 50%, the ETL becomes dense and uniform without apparent cracks and pinholes, so the resultant OSCs achieve the best performance. The best device shows a short circuit current density (J(sc)) of 24.30 mA cm(-2), an open circuit voltage (V-oc) of 0.85 V, and a fill factor (FF) of 70.17%, corresponding to a champion PCE of 14.50%, which is higher than that of OSCs without ZnO NRs (PCE of 13.69% with J(sc) of 23.59 mA cm(-2), V-oc of 0.83 V and FF of 69.91%). Meanwhile, it is shown that the external quantum efficiency (EQE) curve of the optimal OSCs with ZnO NRs is higher than those of OSCs without ZnO NRs, which is consistent with the experimental results of J-V curve. The significant improvements attribute to the enhancement on the electron extraction and the light capture capability by the incorporation of ZnO NRs with excellent transport properties and the improved ETL morphology. Appropriately increased roughness after the incorporation of ZnO NRs also benefits the light absorption of the device. This work could come up with a new idea for the synthesis and application of ZnO-based interfacial materials in thin-film solar cells.

Application of NADH- modified ZnO electron transport layer in high performance organic solar cells

Application of a NADH-modified ZnO Electron Transport Layer in High Performance Organic Solar Cells

The Modification of ZnO Surface with Natural Antioxidants to Fabricate Highly Efficient and Stable Inverted Organic Solar Cells

A hybrid ZnO nanoparticle electron transporting layer for inverted structure organic solar cells with efficiency over 19%

An Efficient and Stable Inverted Structure Organic Solar Cell Using ZnO Modified by 2D ZrSe2 as a Composite Electron Transport Layer

Interface Modification of Tin Oxide Electron‐Transport Layer for the Efficiency and Stability Enhancement of Organic Solar Cells

Passivating the Defects and Modulating the Surface Energy of ZnO Cathode Interlayer for Efficient Nonfullerene Organic Solar Cells

Effects of ZnO Nanoparticle/nanorod Composite Films on the Performance of Organic Solar Cells

Functionalized Nickel Oxide As a Hole Transport Layer for Organic Solar Cells with Simultaneous Enhancement of Efficiency and Stability

Enhanced Efficiency of Organic Solar Cells by Using a ZnO-Fe2O3 Electron Transport Layer

Efficient and Stable Inverted Structure Organic Solar Cells Utilizing Surface-Modified SnO2 As the Electron Transport Layer

An Efficient Interface Modification Material for Improved Efficiency and Stability in Inverted Organic Solar Cells

Modification of the SnO2 Electron Transporting Layer by Using Perylene Diimide Derivative for Efficient Organic Solar Cells

Efficient and stable inverted structure organic solar cells utilizing surface-modified SnO 2 as the electron transport layer

High Performance Organic Solar Cells Based on ZnO: POT2T As an Effective Cathode Interfacial Layer

Doping of ZnO Electron Transport Layer with Organic Dye Molecules to Enhance Efficiency and Photo‐Stability of the Non‐Fullerene Organic Solar Cells

Functionalized nickel oxide as hole transport layers for organic solar cells with simultaneous enhancement of efficiency and stability

Highly Efficient Organic Solar Cells Enabled by a Porous ZnO/PEIE Electron Transport Layer with Enhanced Light Trapping

Li-Doped ZnO Electron Transport Layer for Improved Performance and Photostability of Organic Solar Cells

Simultaneous improvement of efficiency and photostability of organic solar cells by modifying ZnO electron-transport layer with curcumin

Simultaneous UV and Air Stability Improvement of Organic Solar Cells Enabled by Carbon-Coated Zinc Oxide As Cathode Buffer Layer