Abstract:The Hopkinson tension bar technique is widely used and is the only method utilized to measure the mechanical behaviors of materials under a high strain rate; however, many fundamental problems still exist that need to be made clear, which directly link to measurement accuracy. In this work, these problems are elaborately investigated theoretically and experimentally, with the aid of a novelly designed integrated Hopkinson tension bar. Firstly, the calibration for the dynamical mechanical parameters of the bar is theoretically proposed and experimentally obtained by the one-dimension stress wave method, and verified by the integrated Hopkinson tension bar. Then, the stress wave theory is introduced to reconstruct the initial loading process of the Hopkinson bar technique for quantitatively assessing the stress inequilibrium influence on measurement accuracy at small strain. The results indicate that the elastic modulus under high strain rate loading can be determined using the Hopkinson tension bar technique, for the influence of stress inequilibrium is little even when the loading time is over 2.2 characteristic times. The traditional dynamic tension specimens are fixed to the bar ends by gluing plate specimens and screwing the screwed dogbone specimen. The joint contacts are assessed experimentally and analyzed with the integrated Hopkinson tension bar as a reference, as it requires a perfect contacting condition from the specimen to the bar ends. Finally, the involved influences are also explained to elucidate the intrinsic factors, in the hope of offering some reference for potential experiments. Comparison investigations are also conducted with the aim of simulation work, and it is found that the measurement accuracy is distinctly influenced by the transition zone, whereas the influence can be compensated by selecting a specimen with a gauge length around double that of the diametric size.

Determination of Dynamic Elastic Modulus of Polymeric Materials Using Vertical Split Hopkinson Pressure Bar

Experimental and numerical investigations on the use of polymer Hopkinson pressure bars

Investigation on Experimental Method of Low-Impedance Materials Using Modified Hopkinson Pressure Bar

Strain-rate effect of polymers and correction methodology in a SHPB test

Investigation into the Influences of Stress Equilibrium and Contact State on Determining Polymer Dynamic Elastic Modulus by Hopkinson Bar

Experimental And Numerical Study On Unreliability Of Young'S Modulus Measurement By Conventional Split Hopkinson Bar

On loading ceramic-like materials using split Hopkinson pressure bar

On the use of SHPB techniques to determine the dynamic behavior of materials in the range of small strains

Testing of Polymeric Foams at High and Medium Strain Rates

Characterizing Multi Mechanical Behaviors for Epoxy-Like Materials under Wide Strain Rate Range

Some Fundamental Problems Concerning the Measurement Accuracy of the Hopkinson Tension Bar Technique

Dynamic shear response of a polymer bonded explosive using a modified Hopkinson bar apparatus

On the Use of A Viscoelastic Split Hopkinson Pressure Bar

A Novel Methodology for Large Strain under Intermediate Strain Rate Loading

The high strain-rate behaviour of three molecular weights of polyethylene examined with a magnesium alloy split-Hopkinson pressure bar

Impact Testing of Polymeric Foam Using Hopkinson Bars and Digital Image Analysis

Dynamic Testing Technique Based on Multi-channel Photonic Doppler Velocimetry for Investigating the Dynamic Behavior of Materials

On Measuring the Dynamic Elastic Modulus for Metallic Materials Using Stress Wave Loading Techniques

A Study of Specimen Thickness Effects in the Impact Tests on Polymers by Numeric Simulations

Design and Calibration of a Large-Scale 155-mm Split-Hopkinson Pressure Bar

Investigating the Dynamic Compressive and Tensile Properties of Polymer Binder Explosive Based on the Split-Hopkinson Bar Technique