Abstract:The Hopkinson tension bar technique is widely used and is the only method utilized to measure the mechanical behaviors of materials under a high strain rate; however, many fundamental problems still exist that need to be made clear, which directly link to measurement accuracy. In this work, these problems are elaborately investigated theoretically and experimentally, with the aid of a novelly designed integrated Hopkinson tension bar. Firstly, the calibration for the dynamical mechanical parameters of the bar is theoretically proposed and experimentally obtained by the one-dimension stress wave method, and verified by the integrated Hopkinson tension bar. Then, the stress wave theory is introduced to reconstruct the initial loading process of the Hopkinson bar technique for quantitatively assessing the stress inequilibrium influence on measurement accuracy at small strain. The results indicate that the elastic modulus under high strain rate loading can be determined using the Hopkinson tension bar technique, for the influence of stress inequilibrium is little even when the loading time is over 2.2 characteristic times. The traditional dynamic tension specimens are fixed to the bar ends by gluing plate specimens and screwing the screwed dogbone specimen. The joint contacts are assessed experimentally and analyzed with the integrated Hopkinson tension bar as a reference, as it requires a perfect contacting condition from the specimen to the bar ends. Finally, the involved influences are also explained to elucidate the intrinsic factors, in the hope of offering some reference for potential experiments. Comparison investigations are also conducted with the aim of simulation work, and it is found that the measurement accuracy is distinctly influenced by the transition zone, whereas the influence can be compensated by selecting a specimen with a gauge length around double that of the diametric size.

Investigation into the Influences of Stress Equilibrium and Contact State on Determining Polymer Dynamic Elastic Modulus by Hopkinson Bar

Some Fundamental Problems Concerning the Measurement Accuracy of the Hopkinson Tension Bar Technique

Determination of Dynamic Elastic Modulus of Polymeric Materials Using Vertical Split Hopkinson Pressure Bar

Theoretical Instructions for Experimenting Controllable Hopkinson Pressure Bar

Validity Analysis of Sample Strain Measurement in Dynamic Tensile Experiment

Investigation on Experimental Method of Low-Impedance Materials Using Modified Hopkinson Pressure Bar

On loading ceramic-like materials using split Hopkinson pressure bar

On Measuring the Dynamic Elastic Modulus for Metallic Materials Using Stress Wave Loading Techniques

Experimental And Numerical Study On Unreliability Of Young'S Modulus Measurement By Conventional Split Hopkinson Bar

A Novel Methodology for Large Strain under Intermediate Strain Rate Loading

Characterizing Multi Mechanical Behaviors for Epoxy-Like Materials under Wide Strain Rate Range

An electromagnetic Hopkinson bar for low wave impedance material and complex stress paths loading tests

A New Measurement Method Applied to Hopkinson Bar Experiment

A DISCUSSION ON DETERMINING YOUNG'S MODULI BY CONVENTIONAL SPLIT HOPKINSON BAR

Experimental Study of Dynamic Tensile Properties of CFRP、GFRP Laminates under Shock Stress Waves

A novel Hopkinson tension bar system for testing polymers under intermediate strain rate and large deformation

The Investigation of Dynamic Stress Equilibrium of Compact Tension Specimen Based on Hopkinson Tension Bar Device

The Achievement of Constant Strain Rates in Electromagnetic Hopkinson Bar Test

Study on Overloading-resistibility of Initiator and Energetic Materials Based on the Technique of Hopkinson Pressure Bar

A Modified Hopkinson Bar System For Testing Ultra-Soft Materials Under Intermediate Strain Rates

Experimental and numerical investigations on the use of polymer Hopkinson pressure bars