Abstract:The Hopkinson tension bar technique is widely used and is the only method utilized to measure the mechanical behaviors of materials under a high strain rate; however, many fundamental problems still exist that need to be made clear, which directly link to measurement accuracy. In this work, these problems are elaborately investigated theoretically and experimentally, with the aid of a novelly designed integrated Hopkinson tension bar. Firstly, the calibration for the dynamical mechanical parameters of the bar is theoretically proposed and experimentally obtained by the one-dimension stress wave method, and verified by the integrated Hopkinson tension bar. Then, the stress wave theory is introduced to reconstruct the initial loading process of the Hopkinson bar technique for quantitatively assessing the stress inequilibrium influence on measurement accuracy at small strain. The results indicate that the elastic modulus under high strain rate loading can be determined using the Hopkinson tension bar technique, for the influence of stress inequilibrium is little even when the loading time is over 2.2 characteristic times. The traditional dynamic tension specimens are fixed to the bar ends by gluing plate specimens and screwing the screwed dogbone specimen. The joint contacts are assessed experimentally and analyzed with the integrated Hopkinson tension bar as a reference, as it requires a perfect contacting condition from the specimen to the bar ends. Finally, the involved influences are also explained to elucidate the intrinsic factors, in the hope of offering some reference for potential experiments. Comparison investigations are also conducted with the aim of simulation work, and it is found that the measurement accuracy is distinctly influenced by the transition zone, whereas the influence can be compensated by selecting a specimen with a gauge length around double that of the diametric size.

Study on Overloading-resistibility of Initiator and Energetic Materials Based on the Technique of Hopkinson Pressure Bar

Theoretical Instructions for Experimenting Controllable Hopkinson Pressure Bar

Study on Dynamic Mechanical Behavior of MEMS Based on Free Hopkinson Pressure Bar

Study of Initiator’s Shock-Resistibility Through Impact Using Hopkinson Pressure Bar

The Extended Application of Hopkinson Bar Technique

Some Fundamental Problems Concerning the Measurement Accuracy of the Hopkinson Tension Bar Technique

A Novel Methodology for Large Strain under Intermediate Strain Rate Loading

Experimental Method To Evaluate Safety Of Initiator Under High Acceleration

The Split Hopkinson Pressure Bar Technique of High Temperatures and Its Application

Design of a Continuously Repeated Impact Method with Constant Amplitude Based on Hopkinson Bar: Principle and Impact Fatigue Life Testing

Investigation on Experimental Method of Low-Impedance Materials Using Modified Hopkinson Pressure Bar

Study on Dynamic Compressive Mechanical Behavior of Solid Propellant

Experimental Method of Mechanical Behavior of the JHB-1C Explosive at High Strain Rate

An Advanced Pneumatic Firing Mechanism for the Split Hopkinson Bar Equipment

Electromagnetic Hopkinson Bar: A Powerful Scientific Instrument to Study Mechanical Behavior of Materials at High Strain Rates

The Application Development of Experimental Technique of Hopkinson Pressure Bar

Test Method on Dynamic Mechanical Behavior of Initiating Explosive Device under High Acceleration

Experimental Investigation on Dynamic Response of Energetic Materials at High Strain Rate

On loading ceramic-like materials using split Hopkinson pressure bar

The Achievement of Constant Strain Rates in Electromagnetic Hopkinson Bar Test

Design and Experiment of Split Hopkinson Bar Based on Electromagnetic Loading System