Abstract:The Hopkinson tension bar technique is widely used and is the only method utilized to measure the mechanical behaviors of materials under a high strain rate; however, many fundamental problems still exist that need to be made clear, which directly link to measurement accuracy. In this work, these problems are elaborately investigated theoretically and experimentally, with the aid of a novelly designed integrated Hopkinson tension bar. Firstly, the calibration for the dynamical mechanical parameters of the bar is theoretically proposed and experimentally obtained by the one-dimension stress wave method, and verified by the integrated Hopkinson tension bar. Then, the stress wave theory is introduced to reconstruct the initial loading process of the Hopkinson bar technique for quantitatively assessing the stress inequilibrium influence on measurement accuracy at small strain. The results indicate that the elastic modulus under high strain rate loading can be determined using the Hopkinson tension bar technique, for the influence of stress inequilibrium is little even when the loading time is over 2.2 characteristic times. The traditional dynamic tension specimens are fixed to the bar ends by gluing plate specimens and screwing the screwed dogbone specimen. The joint contacts are assessed experimentally and analyzed with the integrated Hopkinson tension bar as a reference, as it requires a perfect contacting condition from the specimen to the bar ends. Finally, the involved influences are also explained to elucidate the intrinsic factors, in the hope of offering some reference for potential experiments. Comparison investigations are also conducted with the aim of simulation work, and it is found that the measurement accuracy is distinctly influenced by the transition zone, whereas the influence can be compensated by selecting a specimen with a gauge length around double that of the diametric size.

Design of a Continuously Repeated Impact Method with Constant Amplitude Based on Hopkinson Bar: Principle and Impact Fatigue Life Testing

Impact Fatigue Behavior of Laser Metal Deposition 316L Stainless Steel with an Automated Impact Fatigue System Based on Split Hopkinson Bar Technique

Development of Structural Testing Equipment for Impact and Complex Loading

Study on Overloading-resistibility of Initiator and Energetic Materials Based on the Technique of Hopkinson Pressure Bar

A Novel Methodology for Large Strain under Intermediate Strain Rate Loading

The experimental and numerical study of AA6061-T6 aluminum alloy under repeated impacts

An Advanced Pneumatic Firing Mechanism for the Split Hopkinson Bar Equipment

Research on the Equivalent Impact Test Method for Different Pulse Widths Based on Micro-Electro-Mechanical System Devices

The Extended Application of Hopkinson Bar Technique

An impact fatigue testing machine to investigate the fatigue lifetime of automatic mechanism key components

Some Fundamental Problems Concerning the Measurement Accuracy of the Hopkinson Tension Bar Technique

A NEW LOADING TECHNIQUE FOR MEASURING SHEARING PROPERTIES OF MATERIALS UNDER HIGH STRAIN RATES

Investigation on the Application of Taylor Impact Test to High-G Loading

Development of Experimental Methods for Impact Testing by Combining Hopkinson Pressure Bar with Other Techniques

Impact Testing Of Cellular Materials With Field Measurement - A Review

Impact Testing of Cellular Materials with Field Measurement – A Review

Study on the Equivalent Impact Method of Long/Short Pulsewidth Loading Based on Cumulative Energy

The Achievement of Constant Strain Rates in Electromagnetic Hopkinson Bar Test

Design and Simulation of High-g Value and Long Pulse Impact Test Device

A Novel Integrated Tension-Compression Design for A Mini Split Hopkinson Bar Apparatus

Design and Experiment of Split Hopkinson Bar Based on Electromagnetic Loading System