Abstract:The Hopkinson tension bar technique is widely used and is the only method utilized to measure the mechanical behaviors of materials under a high strain rate; however, many fundamental problems still exist that need to be made clear, which directly link to measurement accuracy. In this work, these problems are elaborately investigated theoretically and experimentally, with the aid of a novelly designed integrated Hopkinson tension bar. Firstly, the calibration for the dynamical mechanical parameters of the bar is theoretically proposed and experimentally obtained by the one-dimension stress wave method, and verified by the integrated Hopkinson tension bar. Then, the stress wave theory is introduced to reconstruct the initial loading process of the Hopkinson bar technique for quantitatively assessing the stress inequilibrium influence on measurement accuracy at small strain. The results indicate that the elastic modulus under high strain rate loading can be determined using the Hopkinson tension bar technique, for the influence of stress inequilibrium is little even when the loading time is over 2.2 characteristic times. The traditional dynamic tension specimens are fixed to the bar ends by gluing plate specimens and screwing the screwed dogbone specimen. The joint contacts are assessed experimentally and analyzed with the integrated Hopkinson tension bar as a reference, as it requires a perfect contacting condition from the specimen to the bar ends. Finally, the involved influences are also explained to elucidate the intrinsic factors, in the hope of offering some reference for potential experiments. Comparison investigations are also conducted with the aim of simulation work, and it is found that the measurement accuracy is distinctly influenced by the transition zone, whereas the influence can be compensated by selecting a specimen with a gauge length around double that of the diametric size.

On loading ceramic-like materials using split Hopkinson pressure bar

Theoretical Instructions for Experimenting Controllable Hopkinson Pressure Bar

A Novel Methodology for Large Strain under Intermediate Strain Rate Loading

On the use of SHPB techniques to determine the dynamic behavior of materials in the range of small strains

Some Fundamental Problems Concerning the Measurement Accuracy of the Hopkinson Tension Bar Technique

An electromagnetic Hopkinson bar for low wave impedance material and complex stress paths loading tests

Investigation on Experimental Method of Low-Impedance Materials Using Modified Hopkinson Pressure Bar

An Advanced Pneumatic Firing Mechanism for the Split Hopkinson Bar Equipment

Experimental Study on Dynamic Mechanical Properties of Al2o3 Ceramics

The Split Hopkinson Pressure Bar Technique of High Temperatures and Its Application

SHPB Dynamic Compression Test of Al2O3 Ceramics under Constant Strain Rates

Methodological aspects of testing brittle materials using the split Hopkinson bar technique

Data Processing Method for Bidirectional-Load Split Hopkinson Compression Bar

A Novel Experimental Method of Hopkinson Pressure Bar System for Brittle Material

The Extended Application of Hopkinson Bar Technique

Hopkinson Bar Loaded Fracture Experimental Technique: A Critical Review of Dynamic Fracture Toughness Tests

Experimental Research of Foamed Ceramic Composite under Dynamic Loading Using SHPB

Hopkinson bar experiments as a method to determine impact properties of brittle and ductile materials

Experimental evaluation on the dynamic tensile properties of brittle solids by electromagnetic split Hopkinson bar

Wave shaping by special shaped striker in SHPB tests

A Modified Hopkinson Bar System For Testing Ultra-Soft Materials Under Intermediate Strain Rates