Abstract:The Hopkinson tension bar technique is widely used and is the only method utilized to measure the mechanical behaviors of materials under a high strain rate; however, many fundamental problems still exist that need to be made clear, which directly link to measurement accuracy. In this work, these problems are elaborately investigated theoretically and experimentally, with the aid of a novelly designed integrated Hopkinson tension bar. Firstly, the calibration for the dynamical mechanical parameters of the bar is theoretically proposed and experimentally obtained by the one-dimension stress wave method, and verified by the integrated Hopkinson tension bar. Then, the stress wave theory is introduced to reconstruct the initial loading process of the Hopkinson bar technique for quantitatively assessing the stress inequilibrium influence on measurement accuracy at small strain. The results indicate that the elastic modulus under high strain rate loading can be determined using the Hopkinson tension bar technique, for the influence of stress inequilibrium is little even when the loading time is over 2.2 characteristic times. The traditional dynamic tension specimens are fixed to the bar ends by gluing plate specimens and screwing the screwed dogbone specimen. The joint contacts are assessed experimentally and analyzed with the integrated Hopkinson tension bar as a reference, as it requires a perfect contacting condition from the specimen to the bar ends. Finally, the involved influences are also explained to elucidate the intrinsic factors, in the hope of offering some reference for potential experiments. Comparison investigations are also conducted with the aim of simulation work, and it is found that the measurement accuracy is distinctly influenced by the transition zone, whereas the influence can be compensated by selecting a specimen with a gauge length around double that of the diametric size.

Validity Analysis of Sample Strain Measurement in Dynamic Tensile Experiment

Some Fundamental Problems Concerning the Measurement Accuracy of the Hopkinson Tension Bar Technique

A Novel Methodology for Large Strain under Intermediate Strain Rate Loading

Experimental Study of Dynamic Tensile Properties of CFRP、GFRP Laminates under Shock Stress Waves

A Study on High Strain Rate Tensile Experimental Technique Aimed at Fiber Reinforced Composite

Investigation into the Influences of Stress Equilibrium and Contact State on Determining Polymer Dynamic Elastic Modulus by Hopkinson Bar

Theoretical Instructions for Experimenting Controllable Hopkinson Pressure Bar

Characterizing Multi Mechanical Behaviors for Epoxy-Like Materials under Wide Strain Rate Range

Experimental And Numerical Study On Unreliability Of Young'S Modulus Measurement By Conventional Split Hopkinson Bar

Influence of specimen dimensions and strain measurement methods on tensile stress–strain curves

Dynamic Mechanical Behaviors of a Short-glass-fiber Reinforced Polyamide in Hopkinson Bar Test

The use of the Hopkinson bar to validate constitutive relations at high rates of strain

Experiment and Nonlinear Analysis of Concrete Beams with Bonded Prestressing CFRP Tendons

A novel Hopkinson tension bar system for testing polymers under intermediate strain rate and large deformation

Challenges related to testing of composite materials at high strain rates using the split Hopkinson bar technique

Validating the Efficacy of Deformation Distribution Measurement in CFRP Laminates During Three-Point Bending Using the Sampling Moire Method

Experimental study of performance of steel-frp (fiber reinforced polymer) composite bar

The Analysis of Stress Raisers Affecting the GFRP Strength at Quasi-Static and Cyclic Loads by the Theory of Critical Distances, Digital Image Correlation, and Acoustic Emission

Determination of Dynamic Tensile Properties for Low Strength Brittle Solids

Measurement of the Flexural Modulus of Chopped Carbon Fiber Tape Reinforced Thermoplastic with Short Beams

Experimental Investigation on Strain Rate Effect of High-Performance Fiber Reinforced Cementitious Composites Subject to Dynamic Direct Tensile Loading