Abstract:The Hopkinson tension bar technique is widely used and is the only method utilized to measure the mechanical behaviors of materials under a high strain rate; however, many fundamental problems still exist that need to be made clear, which directly link to measurement accuracy. In this work, these problems are elaborately investigated theoretically and experimentally, with the aid of a novelly designed integrated Hopkinson tension bar. Firstly, the calibration for the dynamical mechanical parameters of the bar is theoretically proposed and experimentally obtained by the one-dimension stress wave method, and verified by the integrated Hopkinson tension bar. Then, the stress wave theory is introduced to reconstruct the initial loading process of the Hopkinson bar technique for quantitatively assessing the stress inequilibrium influence on measurement accuracy at small strain. The results indicate that the elastic modulus under high strain rate loading can be determined using the Hopkinson tension bar technique, for the influence of stress inequilibrium is little even when the loading time is over 2.2 characteristic times. The traditional dynamic tension specimens are fixed to the bar ends by gluing plate specimens and screwing the screwed dogbone specimen. The joint contacts are assessed experimentally and analyzed with the integrated Hopkinson tension bar as a reference, as it requires a perfect contacting condition from the specimen to the bar ends. Finally, the involved influences are also explained to elucidate the intrinsic factors, in the hope of offering some reference for potential experiments. Comparison investigations are also conducted with the aim of simulation work, and it is found that the measurement accuracy is distinctly influenced by the transition zone, whereas the influence can be compensated by selecting a specimen with a gauge length around double that of the diametric size.

On the Use of A Viscoelastic Split Hopkinson Pressure Bar

Investigation on Experimental Method of Low-Impedance Materials Using Modified Hopkinson Pressure Bar

A new method for the separation of waves. Application to the SHPB technique for an unlimited duration of measurement

Experimental and numerical investigations on the use of polymer Hopkinson pressure bars

On the use of SHPB techniques to determine the dynamic behavior of materials in the range of small strains

Generalization of Split Hopkinson Bar Technique to Use Viscoelastic Bars

Theoretical Instructions for Experimenting Controllable Hopkinson Pressure Bar

A Hopkinson Pressure Bar with PVDF Thin Film for Measuring Dynamic Behavior of Metallic Foams

On loading ceramic-like materials using split Hopkinson pressure bar

Combined Compression-Shear Loading at High Strain Rates: the Split Hopkinson Pressure Shear Bar

The Application Development of Experimental Technique of Hopkinson Pressure Bar

Study on Dynamic Compressive Mechanical Behavior of Solid Propellant

Testing of Polymeric Foams at High and Medium Strain Rates

A CRITICAL REVIEW OF SPLIT HOPKINSON PRESSURE BAR TECHNIQUE

A Versatile Split Hopkinson Pressure Bar Using Electromagnetic Loading

On the Errors Associated with the Use of Large Diameter SHPB, Correction for Radially Non-Uniform Distribution of Stress and Particle Velocity in SHPB Testing

Wave shaping by special shaped striker in SHPB tests

A Modified Hopkinson Bar System For Testing Ultra-Soft Materials Under Intermediate Strain Rates

Design and Calibration of a Large-Scale 155-mm Split-Hopkinson Pressure Bar

Material behaviour characterisation using SHPB techniques, tests and simulations

Some Fundamental Problems Concerning the Measurement Accuracy of the Hopkinson Tension Bar Technique