Abstract:The stress relaxation experiments were performed at room temperature with different initial strain using a self‐constructed stress relaxation device, and the stress relaxation mechanism was analyzed and a viscoelastic model curve was calculated and fitted. The main purpose of this study is to analyze the fundamental deformation and relaxation mechanisms responsible for the stress relaxation behavior of a novel wide‐angle fabric/ethylene propylene diene monomer (EPDM) composite (W‐60 composite) at room temperature with different initial strain. The designed and constructed stress relaxation test device can test five samples simultaneously. The stress relaxation curves of the W‐60 composite are in general agreement with those of the pure rubber. It is proved again that the wide‐angle fabric has good formability. Through the slope calculation, the stress relaxation curves of the W‐60 composite can be divided into two stages: rapid relaxation stage (RRS) and slow relaxation stage (SRS). The cross‐sections are observed using photographic tracking techniques and CT scans. The stress relaxation mechanism of the W‐60 composite is dominated by the internal physical relaxation. It shows many more correlations under the experiment results for the three‐component Maxwell's model with parallel‐connect nonlinear spring (NS‐TCM model). However, in the mechanical models with more parameters, the computational problem also increases due to the accumulation of local minima, which makes it harder to find global minima. Highlights This study builds stress relaxation testing equipment for flexible composite. This study uses a 7‐day stress relaxation pre‐experiment. The stress retrogradation and elastic recovery have occurred. The deformation and strengthening mechanisms of stress relaxation are revealed. The NS‐TCM model shows a positive correlation with the experimental results.

Time-Strain Rate Superposition for Relaxation Behavior of Polyethylene Pressure Pipes

Viscoelastic and Damage Model of Polyethylene Pipe Material for Slow Crack Growth Analysis

Strain Rate-Dependent Hyperbolic Constitutive Model for Tensile Behavior of PE100 Pipe Material

Nonlinear Time-Dependent Mechanical Behavior of Medium-Density Polyethylene Pipe Material

Simulation and Analysis of the Loading, Relaxation, and Recovery Behavior of Polyethylene and Its Pipes

Study On Constitutive Modeling For Large Deformation Behavior Of Polyethylene Considering Strain Rate Effect

Strain Hardening Behaviors and Mechanisms of Polyurethane under Various Strain Rate Loading

Long term Stress Relaxation Prediction for Nylon 1010 Using Time temperature Superposition Method

Comparison of Mechanical Properties Between PE80 and PE100 Pipe Materials

Characterizing Multi Mechanical Behaviors for Epoxy-Like Materials under Wide Strain Rate Range

Effect of Strain Rate on the Compressive Behavior of Polyurethane Bonding

Mechanical Behaviors and Equivalent Configuration of a Polyurea under Wide Strain Rate Range

Analysis of Stress Relaxation in Bulk and Porous Ultra-High Molecular Weight Polyethylene (UHMWPE)

Rate-dependent Constitutive Model of Poly(ethylene Terephthalate) for Dynamic Analysis

Evaluating the Residual Stress and Its Effect on the Quasi-Static Stress in Polyethylene Pipes

Effect of rotation extrusion and molecular weight on ductile failure of polyethylene pipes under hydrostatic pressure

Rate-dependent Phase Transition of High Density Polyethylene

Experimental and theoretical study of stress relaxation in high-density polyethylene

Study on Viscoelastic Behavior During Slow Crack Growth of Medium Density Polyethylene Pipes

Tensile stress relaxation behavior of a novel wide‐angle fabric/EPDM composite at room temperature

A Mechanical Model for Stress Relaxation of Polylactic Acid/Thermoplastic Polyurethane Blends