Abstract:As known, calcium oxide (CaO) is an alkaline material, which can be used widely to increase the clay-containing soils load carrying capacity, to produce aerated concrete and calcium aluminate cement. In the last few years, introducing CaO into alkali-activated materials (AAMs) became a hot topic and attained more attention than other times. Generally, CaO can be incorporated into AAMs as an additive/a part of the main precursor and a sole activator without/with an auxiliary activator. Incorporating CaO into the matrices may improve some properties and worsen others. This mainly depends on the ratio of CaO, curing conditions, activator type and activator concentration, precursor type and testing age. This review collected, summarized and analyzed the available studies focused on the effect of CaO on the fresh (reaction kinetic, workability, setting time) and hardened (mechanical strength, durability and length change) properties of AAMs. In addition, some recommendations for future works were included. The results showed that the inclusion of CaO in AAMs decreased workability and setting time. In spite of there are contradictory results about the effect of CaO on the compressive strength of AAMs, most of them reported higher compressive strength, especially at the early ages. The incorporation of CaO up to 5% in the matrix is more effective than the incorporation of higher ratios. The inclusion of CaO in the matrix decreased water absorption, decreased total porosity, increased wetting/drying as well as acid attack resistivity. The CaO (5–10%) can be used as a sole activator for precursors. Auxiliary activators such as Al 2 (SO 4 ) 3 , Na 2 CO 3 , Na 2 SiO 3 , Na 2 SO 4 , CaSO 4 , NaOH, Ca(NO 3 ) 2 , NaNO 3 , Mg(NO 3 ) 2 , Mg(HCOO) 2 , Ca(HCOO) 2 , SO 3 , gypsum and MgO can be used to enhance the compressive strength of CaO-activated materials, especially at the early ages.

Composition Design and Performance of Alkali-Activated Cements

Long-term performance of novel high-calcium one-part alkali-activated cement developed from thermally activated lime kiln dust

Mechanism of Na2CO3 on Early Properties of Red Mud-Based Alkali-Activated Cementitious Materials

Properties of Alkali-Activated Concrete Made Using the Optimum Combinations of Precursor Materials and Activation Parameters

Structural Formation of Alkali-Activated Materials Based on Thermally Treated Marl and Na2SiO3

Properties, mineralogy and microstructure evolution of 4-year calcium silicate slag-based alkali-activated materials

Alkali activated cement mixture at ambient curing: Strength, workability, and setting time

Experimental Investigations on Alkali-Activated Slag Cementitious Material

A Concise on the Effect of Calcium Oxide on the Properties of Alkali-Activated Materials: A Manual for Civil Engineers

Early mechanical properties and strength calculation method of slag-based alkali activated concrete

Microstructures and properties of alkali-activated slags with composite activator: Effects of Na2O equivalents

Effect of activator on rheological properties of alkali-activated slag-fly ash pastes

Properties of Alkali-Activated Slag Cement Activated by Weakly Alkaline Activator

Physical and Chemical Relationships in Accelerated Carbonation Conditions of Alkali-Activated Cement Based on Type of Binder and Alkali Activator

Setting Time and Strength Monitoring of Alkali-Activated Cement Mixtures by Ultrasonic Testing

INVERSTIGATION ON THE RELATION BETWEEN SHRINKAGE AND MICROSTUCTURE OF ALKALI ACTIVATED CEMENT

Study on properties and soil solidification mechanism of alkali - activated cementitious materials

A ternary optimization of alkali-activated cement mortars incorporating glass powder, slag and calcium aluminate cement

Mix design and mechanical properties of geopolymer and alkali activated concrete: Review of the state-of-the-art and the development of a new unified approach

Mechanical properties of low calcium alkali activated binder system under ambient curing conditions

Performance of Alkali-Activated Materials Using Precursors with High Impurity Contents