Abstract:The design of power‐efficient SRAM cells is necessary for biomedical applications such as body area networks (BANs) to extent their battery life. SRAM cell's power consists of two main components, including leakage power and dynamic power, in which the former overcomes the latter in advanced technology. This paper presents a low‐leakage single‐bitline 9T (L2SB9T) SRAM cell. The proposed design is free from read‐disturbance issue and eliminates writing “1” problem. The results are carried out by utilizing HSPICE and 16‐nm CMOS PTM at a 0.7 V, 25°C, and under severe PVT variations. The proposed L2SB9T SRAM cell is comprehensively compared with other recently published SRAM cells including conventional 6T, write/read enhanced 8T (WRE8T), transmission‐gate 9T (TG9T), read‐disturb‐free 9T (RDF9T), fully differential 10T (Chang10T), data‐independent read port 10T (DIRP10T), and single‐bitline 11T (SB11T). It shows at least 1.26X/1.07X/1.01X improvement in read static noise margin (RSNM)/write static noise margin (WSNM)/write margin (WM). Furthermore, the leakage power is reduced by the proposed cell, at least 1.137X. Moreover, the suggested cell consumes the third/second best dynamic read/write power, which is 1.42X/1.37X lower than that of conventional 6T SRAM cell. The proposed L2SB9T SRAM cell performs its read/write operation reliably by showing at least 1.71X narrower speared in RSNM compared to the best SRAM cell and third best WM variability. For all these improvements, the proposed L2SB9T SRAM cell incurs a 4.20X/1.06X/1.808X penalty in read delay/write delay/layout area when compared with the best SRAM cells, that is, the Chang10T/6T/6T. This paper presents a low‐leakage single‐bitline 9T (L2SB9T) SRAM cell, which is free from the read‐disturbance issue and eliminates the writing “1” problem. Comparison results show at least 1.26X/1.07X/1.01X improvement in read static noise margin (RSNM)/write static noise margin (WSNM)/write margin (WM). Furthermore, the leakage power is reduced at least 1.137X.

A Disturb-Free 10T SRAM Cell with High Read Stability and Write Ability for Ultra-Low Voltage Operations

A Half-Select Disturb-Free 11T SRAM Cell with Built-In Write/Read-Assist Scheme for Ultralow-Voltage Operations

A Reliable Low Standby Power 10T SRAM Cell With Expanded Static Noise Margins

A FinFET based low-power write enhanced SRAM cell with improved stability

Analysis of a read disturb-free 9T SRAM cell with bit-interleaving capability.

Low Voltage SRAM Cell Suitable for Bit-Interleaved Structure

A low‐leakage single‐bitline 9T SRAM cell with read‐disturbance removal and high writability for low‐power biomedical applications

A 0.33 V 2.5 Μw Cross-Point Data-Aware Write Structure, Read-Half-select Disturb-Free Sub-Threshold SRAM in 130 Nm CMOS

Novel 15T SRAM Cell for Low Voltage High Reliability Application

A Highly Reliable and Low-Power Cross-Coupled 18T SRAM Cell

A Single Bitline Highly Stable, Low Power With High Speed Half-Select Disturb Free 11T SRAM Cell

A low power static noise margin enhanced reliable 8 T SRAM cell

A 320 Mv, 6 Kb Subthreshold 10T SRAM Employing Voltage Lowering Techniques

An Ultra-Low Leakage Bitcell Structure with the Feedforward Self-Suppression Scheme for Near-Threshold SRAM.

Column-Selection-Enabled 10T SRAM Utilizing Shared Diff-VDD Write and Dropped-VDD Read for Power Reduction

Highly Area-Efficient Low-Power SRAM Cell with 2 Transistors and 2 Resistors

An Ultra-Low-Voltage Bit-Interleaved Synthesizable 13T SRAM Circuit.

9T fast‐write SRAM bit cell with no conflicts for ultra‐low voltage

An ultra-low-supply-voltage ultra-low-power subthreshold SRAM bitcell design

A 0.2 V-1.8 V 8T SRAM with Bit-interleaving Capability.

A Low-Energy, Stable, Single-Bitline Accessed FinFET 9T-SRAM