Abstract:Single point diamond turning (SPDT) of large functional surfaces on silicon remains a challenge owing to severe diamond tool wear. Recently, tremendous efforts have been made in understanding the machining mechanics, especially wear mechanism of diamond tools in SPDT of silicon. However, the localised transition of machining mode from ductile to brittle as a result of progressive tool wear has not been well understood yet. In this paper both experimental and numerical simulation studies of SPDT were performed in an effort to reveal the underlying phenomenon of ductile to brittle transition (DBT) as a consequence of diamond tool wear. Series of facing and plunging cuts were performed and the profile of machined surface was evaluated together with the progression of tool wear. The transition stages from ductile to brittle were identified by analysing the surface profiles of plunging cuts using a scanning electron microscope (SEM) and a 2D contact profilometer and a white light interferometer. The progressive degradation of the cutting edge of diamond tool and its wear mechanism was determined using Least Square (LS) arc analysis and SEM. The study reveals that at initial tool wear stage, the ductile to brittle transition initiates with the formation of lateral cracks which are transformed into brittle pitting damage with further tool edge degradation. Numerical simulation investigation using smoothed particle hydrodynamics (SPH) was also conducted in this paper in order to gain further insight of variation of stress on the cutting edge due to tool wear and its influence on brittle to ductile transition. A significant variation in frictional resistance to shear deformation as well as position shift of the maximum stress values was observed for the worn tools. The magnitude and distribution of'hydrostatic stress were also found to change significantly along the cutting edge of new and worn diamond tools. (C) 2016 The Authors. Published by Elsevier B.V.

Investigations on Brittle-Ductile Cutting Transition and Crack Formation in Diamond Cutting of Mono-Crystalline Silicon

Finite element analysis of the effect of tool rake angle on brittle-to-ductile transition in diamond cutting of silicon

Brittle-Ductile Transition In Diamond Cutting Of Silicon Single Crystals

Modeling and Simulation of Phase Transformation and Crack Formation During Scribing of Mono-Crystalline Silicon

A Study on Material Removal Caused by Phase Transformation of Monocrystalline Silicon During Nanocutting Process Via Molecular Dynamics Simulation

Brittle-to-ductile Transition in Elliptical Vibration-Assisted Diamond Cutting of Reaction-Bonded Silicon Carbide

Study on Brittle-Ductile Transition Mechanism of Ultra-Precision Turning of Single Crystal Silicon

Finite Element Modeling of Brittle and Ductile Modes in Cutting of 3C-Sic

Diamond turning model in brittle-ductile transition of brittle materials

A Numerical Analysis of Ductile Deformation during Nanocutting of Silicon Carbide via Molecular Dynamics Simulation

The Investigation Of Influence Of Tool Wear On Ductile To Brittle Transition In Single Point Diamond Turning Of Silicon

Atomistic origin of brittle-to-ductile transition behavior of polycrystalline 3C–SiC in diamond cutting

A study on mechanism of nano-cutting single crystal silicon

Molecular Dynamics Analysis Micro-Mechanism Of Ductile Machining Single Crystal Silicon By Means Of Nanometric Cutting Technology

Effect of Temperature on Ductile-to-brittle Transition in Diamond Cutting of Silicon

Study on the Effect of Diamond Wire Saw-Cutting Process Parameters on Brittle Cracks in Monocrystalline Silicon

Simulation Study of Material Deformation in Monocrystal Silicon Nano-Machining

Analysis about Diamond Tool Wear in Nano-Metric Cutting of Single Crystal Silicon Using Molecular Dynamics Method

Modelling and experimental investigation on nanometric cutting of monocrystalline silicon

A Study on the Surface Quality and Brittle–ductile Transition During the Elliptical Vibration-Assisted Nanocutting Process on Monocrystalline Silicon Via Molecular Dynamic Simulations

Simulation Study of Cutting Forces, Stresses and Temperature During Nanometric Cutting of Single Crystal Silicon