Abstract:In diesel vehicle exhaust after-treatment systems, high silica Cu-SSZ-13 has received increasing attention as a commercialized catalyst owing to its high efficiency in selective catalytic reduction reactions with NH 3 (NH 3 -SCR). However, research on the regulation of Cu 2+ species within metal active centers in the pore structure of chabazite (CHA)-type zeolite to improve catalytic performance lacks sufficient depth. Herein, SSZ-13 zeolite with various Al distributions was prepared by adjusting the proportion of N,N,N-Trimethyl-1-adamantanaminiumhydroxide (TMAdaOH) and Na in the initial gel. Moreover, three representative Cu-SSZ-13 catalysts with different Cu 2+ species were synthesized via an ion exchange method. 23 Na MAS NMR and NO adsorption infrared spectroscopy results revealed that with increasing Na content and decreasing TMAdaOH concentration in the initial gel, the number of paired Al in the CHA framework gradually increased. Consequently, this increased the number of Cu 2+ -2Z sites near six-membered ring (MR) and reduced the amount of [Cu(OH)] + -Z sites near eight-MR. The fresh Cu-SSZ-13 catalyst, with a moderate amount of Cu 2+ -2Z and [Cu(OH)] + -Z, exhibited optimal catalytic performance across the entire temperature window. After hydrothermal aging, Cu-SSZ-13 with a higher concentration of Cu 2+ -2Z species featured optimal performance among all Cu-SSZ-13 catalysts above 400 °C. These findings indicated the significance of balancing the amount of both Cu 2+ -2Z and [Cu(OH)] + -Z in the Cu-SSZ-13 zeolite. Additionally, the results elucidated the reaction intermediates involved in the NH 3 -SCR process catalyzed by Cu-SSZ-13 with various Cu species.

Effects of Na+ on Cu/SAPO-34 for ammonia selective catalytic reduction.

Effect of Cu loading on the performance and kinetics of Cu/SAPO-34 catalysts for selective catalytic reduction with NH3

New Insight into Cu/SAPO-34 Preparation Procedure: Impact of NH4-SAPO-34 on the Structure and Cu Distribution in Cu-SAPO-34 NH3-SCR Catalysts

Inhibition of Cu-SSZ-13 for NH 3 Selective Catalytic Reduction by K/Na Poisoning

Cu-exchanged Al-rich SSZ-13 zeolite from organotemplate-free synthesis as NH3-SCR catalyst: Effects of Na+ ions on the activity and hydrothermal stability

Location and Nature of Cu Species in Cu/SAPO-34 for Selective Catalytic Reduction of NO with NH3

The Role of Impregnated Sodium Ions in Cu/SSZ-13 NH3-SCR Catalysts

Effects of Post-Treatment Method and Na Co-Cation on the Hydrothermal Stability of Cu–SSZ-13 Catalyst for the Selective Catalytic Reduction of NO with NH3

The Effect of Sulfate Species on the Activity of NH3-SCR over Cu/SAPO-34

Why Does There Have To Be A Residual Na Ion As A Co-Cation On Cu/Ssz-13?

Role of Brønsted Acidity in NH3 Selective Catalytic Reduction Reaction on Cu/SAPO-34 Catalysts

The influence of sodium on the catalytic properties, low-temperature hydrothermal stability, and sulfur resistance of Cu-SAPO-34 for NOx reduction by NH3-SCR

Regulation of Al distributions and Cu2+ locations in SSZ-13 zeolites for NH3-SCR of NO by different alkali metal cations

The effect of Si environments on NH3 selective catalytic reduction performance and moisture stability of Cu-SAPO-34 catalysts

Effects of Cu species in Cu-SSZ-13 zeolites on the performance of NO x reduction reactions

The enhanced catalytic activity of Cu/SAPO-34 by ion exchange method for selective catalytic reduction of nitric oxide

Recent Nh3-Scr Mechanism Research over Cu/Sapo-34 Catalyst

Selective Catalytic Reduction of NOx with Ammonia over Copper Ion Exchanged SAPO‐47 Zeolites in a Wide Temperature Range

Comparative study on potassium poisoning of Cu-CHA catalysts for NH3-SCR: Stability and transformation of Cu2+ ions

Improvement of Alkali Metal Resistance for NH3-SCR Catalyst Cu/SSZ-13: Tune the Crystal Size

Potassium Poisoning on Cu-Sapo-34 Catalyst for Selective Catalytic Reduction of Nox with Ammonia