Abstract:Cu/SAPO-34 is a promising NH3-SCR catalyst and its precise preparations involving ammonia exchange, copper loading and copper distribution are still the challenges in exchange procedure of SAPO-34 support. In the present work, a new series of x-NH4-SAPO samples prepared by controlling NH3 adsorption temperature (x standed for NH3 adsorption temperature) were used to examine their impacts on the following Cu exchange compared with NH4-SAPO-34 by traditional liquid exchange. The TPD and DRIFTS experiments revealed that the NH4+ amounts on x-NH4-SAPO samples increased with the NH3 adsorption temperature decreasing. And 200-NH4-SAPO prepared by gas NH3 adsorption (GA) under 200 degrees C contained the similar NH4+ loading with L-NH4-SAPO prepared by the liquid ion exchange (LIE) method, but they presented different coordinations between NH4+ species and Si (OH) Al. After copper exchange, the H-2-TPR and EPR results unveiled monodentate NH4+ on Si-(OH) Al structure would facilitate isolated Cu2+ generation in Cu/SAPO-34, while the polydentate NH4+ would promote CuO formation via liquid Cu ion exchange. Therefore, it was found that the isolated Cu2+ content in 200-Cu-SAPO was lower than L-Cu-SAPO even under the same copper exchange condition for different NH4+ coordinations. In addition, the ex -situ IR and NMR results demonstrated that the Si O Al bonds without NH4+ protections unveiled bond breakage during the liquid Cu exchange. Finally, our study proposed NH4+ exchange mechanism on Bronsted acid sites in NH4-SAPO-34 and indicated their influences on the copper distribution and the support integrity for x-Cu-SAPO catalysts. (C) 2017 Elsevier B.V. All rights reserved.

Destructive and Protective Effects of NH3 on the Low-Temperature Hydrothermal Stability of SAPO-34 and Cu-SAPO-34.

Destructive and Protective Effects of NH 3 on the Low-Temperature Hydrothermal Stability of SAPO-34 and Cu-SAPO-34

Understanding the direct relationship between various structure-directing agents and low-temperature hydrothermal durability over Cu-SAPO-34 during the NH 3 -SCR reaction

Unravelling the Phosphorus-Induced Effect on NH3-SCR Catalytic Performance, Hydrothermal Stability and SO2 Resistance of Cu/SAPO-34

Improvement of Low-Temperature Hydrothermal Stability of Cu/Sapo-34 Catalysts by Cu2+ Species

New Insight into Cu/SAPO-34 Preparation Procedure: Impact of NH4-SAPO-34 on the Structure and Cu Distribution in Cu-SAPO-34 NH3-SCR Catalysts

Critical Roles of Cu(OH)2 in Low-Temperature Moisture-Induced Degradation of Cu-SAPO-34 SCR Catalyst: Correlating Reversible and Irreversible Deactivation

Influence of hydrothermal time on the formation of SAPO-56 structure and its catalytic activity of removal NOx by NH3-SCR with Cu/SAPO-56

Insights into the impact of lanthanum on hydrothermal-induced migration and transformation of copper species in Cu/SAPO-34 catalyst for NH3-SCR

The effect of Si environments on NH3 selective catalytic reduction performance and moisture stability of Cu-SAPO-34 catalysts

Pr-functionalized Cu/SAPO-34 with Superior Hydrothermal Stability for NH3-SCR: the Copper Species and Framework Stabilization Effect

Boosting the Catalytic Performance of Cu-SAPO-34 in NOx Removal Via Hydrothermal Treatment.

A controllable zeolite framework stability of Cu/SAPO-34 via adjusting the copper coordination environment for NH 3 -SCR under hydrothermal condition

Quantitative study of the adsorption sites and reaction mechanism of NH 3 -SCR on Cu-SSZ-39 and H-SSZ-39

Optimization of Hybrid Crystal with SAPO-5/34 on Hydrothermal Stability for deNOx Reaction by NH3

The Migration of Cu Species over Cu–SAPO-34 and Its Effect on NH3 Oxidation at High Temperature

Praseodymium Effects on Great Improving Low-Temperature Hydrothermal Stability of Cu/SAPO-34 NH3-SCR Catalysts

The role of Si coordination structures in the catalytic properties and durability of Cu-SAPO-34 as NH3-SCR catalyst for NOx reduction

Promoting effect of post-synthesis treatment strategy on NH3-SCR performance and hydrothermal stability of Cu-SAPO-18

The influence of sodium on the catalytic properties, low-temperature hydrothermal stability, and sulfur resistance of Cu-SAPO-34 for NOx reduction by NH3-SCR

Determining hydrothermal deactivation mechanisms on Cu/SAPO-34 NH3-SCR catalysts at low- and high-reaction regions: establishing roles of different reaction sites