Abstract:Cu-SSZ-13 and Cu-SSZ-39, with similar structures, are both highly active and hydrothermally stable in the selective catalytic reduction of NOx with NH3 (NH3-SCR), attracting great attention for applications on diesel vehicles. In this study, it was interestingly found that NO2 has distinct effects on the NOx conversion over Cu-SSZ-13 and Cu-SSZ-39, with an inhibiting effect for Cu-SSZ-13 but a promoting effect for Cu-SSZ-39. The distinct NO2 effects were found to be associated with the differences in the reactivity of surface NH4NO3, a key intermediate for NH3-SCR, on these two Cu-based small-pore zeolites. Cu-SSZ-13 has excellent standard SCR activity, but the reactivity of surface NH4NO3 with NO is relatively low, which would induce the accumulation of NH4NO3 on the surface and thus inhibit NOx conversion. Surface Brønsted acid sites play key roles in the reduction of surface NH4NO3 by NO, and Cu-SSZ-39 showed much higher surface acidity than Cu-SSZ-13. Compared with Cu-SSZ-13, the intrinsic standard SCR activity of Cu-SSZ-39 was lower but NH4NO3 could be reduced by NO rapidly on Cu-SSZ-39, even faster than the reduction of NO by the adsorbed NH3 on Cu active sites; thus, NOx conversion was promoted by NO2 on Cu-SSZ-39. This work provides an improved understanding of fast SCR on Cu-based small-pore zeolites.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.est.0c06256?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.est.0c06256</a>.Detailed activity tests, characterization methods, NH3-SCR performance of H-SSZ-13 and H-SSZ-39 zeolites, TPD results after NH3, and NO2 adsorption at 130 °C, in situ DRIFTS results of NH3/NO + O2/NO2 + O2 adsorption at 200 °C, NO2-TPD results, in situ DRIFTS results of NO + O2 adsorption after the adsorption of NH3 and NO2 at 200 °C, in situ DRIFTS results of TPD after the adsorption of NH3 and NO2 at 30 °C, SEM images, TEM images, and mapping results, H2-TPR results, NH3-TPD results, Py-FTIR spectra, specific surface areas, and Cu contents of Cu1.8-SSZ-13 and Cu1.8-SSZ-39 (<a class="ext-link" href="/doi/suppl/10.1021/acs.est.0c06256/suppl_file/es0c06256_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Effects of Post-Treatment Method and Na Co-Cation on the Hydrothermal Stability of Cu–SSZ-13 Catalyst for the Selective Catalytic Reduction of NO with NH3

Tuning the high-temperature hydrothermal stability of one-pot derived Cu-SSZ-13 in the presence of SO 2 for selective catalytic reduction of NO x by ammonia

Effects of Cu species in Cu-SSZ-13 zeolites on the performance of NO x reduction reactions

Regulation of Al distributions and Cu2+ locations in SSZ-13 zeolites for NH3-SCR of NO by different alkali metal cations

A New Insight into Active Cu2+ Species Properties in One‐Pot Synthesized Cu‐SSZ‐13 Catalysts for NOx Reduction by NH3

Excellent Performance of One-Pot Synthesized Cu-SSZ-13 Catalyst for the Selective Catalytic Reduction of NOx with NH3

La ions-enhanced NH3-SCR performance over Cu-SSZ-13 catalysts

One-pot synthesis of Fe/Cu-SSZ-13 catalyst and its highly efficient performance for the selective catalytic reduction of nitrogen oxide with ammonia

Zeolite and Related Porous Materials for Energy in New Era of Carbon Peak and Carbon Neutralization

Insight into SO2 poisoning and regeneration of one-pot synthesized Cu-SSZ-13 catalyst for selective reduction of NO by NH3

Interface Induced by Hydrothermal Aging Boosts the Low-Temperature Activity of Cu-SSZ-13 for Selective Catalytic Reduction of NOx

Promoting Effect of Mn on In Situ Synthesized Cu-SSZ-13 for NH3-SCR

Optimization of isolated copper species on the NH 3 -SCR performance over Cu/SSZ-39 modified by ammonia water

The influence of sodium on the catalytic properties, low-temperature hydrothermal stability, and sulfur resistance of Cu-SAPO-34 for NOx reduction by NH3-SCR

Why Does There Have To Be A Residual Na Ion As A Co-Cation On Cu/Ssz-13?

Understanding the influence of hydrothermal treatment on NH3-SCR of NO activity over Cu -SSZ-16

High Activity and Wide Temperature Window of Fe‐Cu‐SSZ‐13 in the Selective Catalytic Reduction of NO with Ammonia

Enhanced hydrothermal stability of Cu-SSZ-13 by compositing with Cu-SAPO-34 in selective catalytic reduction of nitrogen oxides with ammonia

Distinct NO 2 Effects on Cu-SSZ-13 and Cu-SSZ-39 in the Selective Catalytic Reduction of NO x with NH 3

Unraveling the nature of sulfur poisoning on Cu/SSZ-13 as a selective reduction catalyst

Understanding the Water Effect for Selective Catalytic Reduction of NOx with NH3 over Cu-SSZ-13 Catalysts