Abstract:This article proposes a digital control structure for a doubly decoupled gyroscope working in the Lissajous frequency-modulated (LFM) mode based on digital phase-locked loops (PLLs), which demodulates the angular rate signal directly from the readable digital gyroscope resonance frequency, eliminating the need for specific frequency readout circuits. The resonance frequencies of the LFM gyroscope working modes contain a mode mismatch frequency modulated by input angular rate, respectively, which are tracked by two digital PLLs followed by subsequent digital demodulation and filtering. A linearized model of the digital PLL is built to analyze noise and control characteristics for different PI parameters. The impact of different amplitude–phase extraction architectures on the extracted phase signal is also addressed in this article. Contrast experiments are carried out using the same gyroscope with large internal thermal stress due to the silicon-glass bonding process and no stress relief structure around the sensing element, working in the traditional amplitude-modulated (AM) mode and the LFM mode. Overall, the LFM working mode maintains its low-temperature sensitivity and high stability in spite of the large internal thermal stress in the gyroscope compared to AM working modes. The maximum scale factor variation over the temperature range from 10 °C to 50 °C is 1000 ppm for the LFM mode compared to 51 900 ppm for the AM closed mode. The maximum zero rate output drift over the same temperature range is 0.1248 °/s for the LFM mode and 10.7139 °/s for the AM closed mode. The scale factor nonlinearity is 329 ppm with an angular rate input range of ±50 °/s for the LFM mode compared to 1902 ppm for the AM closed mode. The LFM mode zero-bias fluctuation for ten days is less than 0.12 °/s. The angle random walk (ARW) and the bias instability (BI) of the LFM gyroscope are 0.316 °/ $\surd \text{h}$ and 2 °/h, respectively.

Double Closed-Loop Control of Integrated Optical Resonance Gyroscope with Mean-Square Exponential Stability.

Dual closed-loop control method for resonant integrated optic gyroscopes with combination differential modulation

An Open-Loop RFOG Based on 2nd/4th Harmonic Feedback Technique to Suppress Phase Modulation Index’s Drift

A Digital Control Structure for Lissajous Frequency-Modulated Mode MEMS Gyroscope

Closed-loop resonant fiber optic gyro with an improved digital serrodyne modulation.

Closed-Loop Resonant Fiber-Optic Gyroscope with a Broadband Light Source

Improving the Performance of Broadband Source-Driven Resonant Fiber-Optic Gyroscopes

Improving Thermal Stability of a Resonant Fiber Optical Gyroscope Using Triple Closed Loops

Resonator Fiber Optic Gyroscope with an All Digitalized System

Precision Analysis of Frequency Lock-in Technique in Resonator Micro Optic Gyroscope

Double Closed-Loop Resonant Micro Optic Gyro Using Hybrid Digital Phase Modulation.

A Miniaturized Compact Open-Loop RFOG with Demodulation Signal Compensation Technique to Suppress Intensity Modulation Noise

Research on the Single-Double Interval Closed-Loop Method of Resonant Fiber Optic Gyro

Eliminating bias drift error in lock-in frequency for a resonant fiber optic gyro.

Frequency Locking Technique in Digital Closed-Loop Resonator Fiber Optic Gyro

Improving the Scale Factor Thermal Stability of Resonant Fiber-Optic Gyroscopes by Tracking the Half-Wave Voltage of the Phase Modulator

The Analysis and Design of Closed-Loop Control System for MEMS Vibratory Gyroscopes

Improving thermal stability of a closed-loop resonant fiber-optic gyroscope using a double demodulation technique

A Novel Closed-Loop Control to Solve Light Source Power Fluctuations in the Fiber-Optic Gyroscope

Triple Closed-Loop Resonant Fiber Optic Gyroscope

Double closed-loop resonator fiber optic gyro with improved digital serrodyne modulation