Abstract:To avoid introduction of milling media during ball‐milling process and ensure uniform distribution of SiC and graphite in ZrB2 matrix, ultrafine ZrB2–SiC–C composite powders were in‐situ synthesized using inorganic–organic hybrid precursors of Zr(OPr)4, Si(OC2H5)4, H3BO3, and excessive C6H14O6 as source of zirconium, silicon, boron, and carbon, respectively. To inhabit grain growth, the ZrB2–SiC–C composite powders were densified by spark plasma sintering (SPS) at 1950°C for 10 min with the heating rate of 100°C/min. The precursor powders were investigated by thermogravimetric analysis–differential scanning calorimetry and Fourier transform infrared spectroscopy. The ceramic powders were analyzed by X‐ray diffraction, X‐ray photoelectron spectroscopy, and scanning electron microscopy. The lamellar substance was found and determined as graphite nanosheet by scanning electron microscopy, Raman spectrum, and X‐ray diffraction. The SiC grains and graphite nanosheets distributed in ZrB2 matrix uniformly and the grain sizes of ZrB2 and SiC were about 5 μm and 2 μm, respectively. The carbon converted into graphite nanosheets under high temperature during the process of SPS. The presence of graphite nanosheets alters the load‐displacement curves in the fracture process of ZrB2–SiC–G composite. A novel way was explored to prepare ZrB2–SiC–G composite by SPS of in‐situ synthesized ZrB2–SiC–C composite powders.

A Novel In Situ Synthesis Of Sibcn-Zr Composites Prepared By A Sol-Gel Process And Spark Plasma Sintering

Influence of sol-gel derived ZrB2 additions on microstructure and mechanical properties of SiBCN composites

Oxidation Behavior of SiBCN-Zr Composites at 1500 °C Prepared by Reactive Spark Plasma Sintering

ZrB2–SiC–G Composite Prepared by Spark Plasma Sintering of In‐Situ Synthesized ZrB2–SiC–C Composite Powders

Microstructure and Thermal Shock Behavior of Sol–gel Introduced ZrB 2 Reinforced SiBCN Matrix

In situ synthesis of PcBN composites by Sialon combined with cBN-TiB2-AlN and their properties

Processing and Characterization of SiB0.5C1.5N0.5 Produced by Mechanical Alloying and Subsequent Spark Plasma Sintering

SPS densification and ablative performance of ZrB2–SiC–ZrC composites derived from the ternary powders by sol-gel

SiC-BN Ceramic Matrix Composites by In-situ Reaction

Effect of Zr on the solid sintering process of SiBCN ceramics: Diffusion couple method experiment and DFT calculation

Enhanced thermal shock resistance of BN-based composites sintered by hot-pressing with the introduction of nano oxides

In Situ Synthesis of Ultrafine Zrb2-Sic Composite Powders and the Pressureless Sintering Behaviors

Incorporation of BN-coated carbon fibers into ZrB2/SiBCN ceramic composites and their ablation behavior

Fabrication and microstructure of in-situ synthesized SiBON composites

Synthesis of Coatings on SiC Fibers and Their Effects on Microstructure and Mechanical Properties of SiCf/SiBCN Composites

Study on the toughening mechanism of in-situ synthesis (TixZr1−x)B2 in solid-state sintered SiC composite ceramics

Modification of SiBCN by Zr Atom and Its Effect on Ablative Resistance of Cf/SiBCN(Zr) Composites

In situ ZrC/Si-B-C-N monoliths prepared by sol-gel and reactive hot-pressing: Processing, microstructure, mechanical properties and oxidation behavior

Densification, Microstructural Evolution and Mechanical Properties of Si-B-C-N Monoliths with LaB6 Addition

Design and Thermodynamics of in -Situ Formed SiC -BN Ceramic Matrix Composites

Fabrication and Properties of SiO2-BN-Si3N4 Composites