Abstract:Ultra-sensitive and selective moisture sensors are needed in various industries for processing control or environmental monitoring. As an outstanding sensor platform, surface-stress sensing microcantilevers have potential application in moisture detection. To enlarge the deflection of the microcantilever under surface stress induced by specific reactions, a new SiO 2 microcantilever is developed which features a much lower Young’s modulus than conventional Si or SiN x microcantilevers. For comparing SiO 2 cantilever with Si cantilevers, a model of the cantilever sensor is given by using both analysis and simulation, resulting in good agreement with the experimental data. The results demonstrate the SiO 2 cantilever can achieve a much higher sensitivity than the Si cantilever. In order to fabricate this device, a new fabrication process using isotropic combined with anisotropic dry etching to release the SiO 2 microcantilever beam by ICP (Inductively Coupled Plasma) was developed and investigated. This new process not only obtains a high etch rate at 9.1 μm/min, but also provides good profile controllability, and a flexibility of device design. Attributed to the high sensitivity, a significant deflection amplitude of the surface modified SiO 2 microcantilever was observed upon exposure to 1% relative humidity. The SiO 2 cantilevers are promising for inexpensive and highly sensitive moisture detection.

High Resolution and Fast Response of Humidity Sensor Based on AlN Cantilever With Two Groups of Segmented Electrodes

Humidity Sensor with High Resolution and Fast Response Based on AlN Cantilever with Two Groups of Segmented Electrodes

AN ALN RESONANT MICROCANTILEVER HUMIDITY SENSOR BY ACTIVATING SPECIFIC SETS OF TOP ELECTRODES BASED ON GRAPHENE OXIDE

A novel SAW humidity sensor based on electrosprayed polymerized electrolyte film

Humidity Sensors Based on AlN Microcantilevers Excited at High-Order Resonant Modes and Sensing Layers of Uniform Graphene Oxide

Fabrication and Characterization of Sio2 Microcantilever for High Sensitive Moisture Sensor

Al2O3-coated Microcantilevers for Detection of Moisture at Ppm Level

Micromachined SiO 2 microcantilever for high sensitive moisture sensor

A Novel Serial High Frequency Surface Acoustic Wave Humidity Sensor

Sodium Alginate/MXene-Based Flexible Humidity Sensors with High-Humidity Durability and Application Potentials in Breath Monitoring and Non-Contact Human–Machine Interfaces

AN IMPROVED SENSITIVITY ALN MICROCANTILEVER HUMIDITY SENSOR USING INTERDIGITAL TRANSDUCERS ACTUATED VERY HIGH RESONANT MODE AND GRAPHENE OXIDE SENSING LAYER

A novel surface acoustic wave-impedance humidity sensor based on the composite of polyaniline and poly(vinyl alcohol) with a capability of detecting low humidity

Relative Humidity Measurement Technology Based on Microcantilever Resonance

A Humidity Sensor Based on AlN Lamb Wave Resonator Coated with Graphene Oxide of Different Concentrations

Humidity Sensor Based on Thin-Film Piezoelectric-on-Substrate Resonator and MoS2 for Multifunctional Applications.

A HUMIDITY SENSOR WITH HIGH SENSITIVITY AND LOW TEMPERATURE COEFFICIENT OF FREQUENCY BASED ON ALN SURFACE ACOUSTIC WAVE AND GRAPHENE OXIDE SENSING LAYER

Modified Coefficient of Equivalent Mass to Explain Decreased Relative Sensitivity of Piezoelectric Cantilever Humidity Sensor in High Mode

A High Performance Humidity Sensor Based on Surface Acoustic Wave and Graphene Oxide on AlN/Si Layered Structure

A Novel Humidity Sensor Based On Circular Interdigital Transducers Excited Aln Lamb Wave Device Incorporating Graphene Oxide Layer

Highly sensitive and fast response Love wave mode humidity sensor based on MoS2@Ti3C2Tx hierarchical structure

A PIEZOELECTRIC RESONANT HUMIDITY SENSOR WITH ENHANCED SENSITIVITY BASED ON HIGH MODE DRIVEN BY INTERDIGITAL TRANSDUCERS COATED WITH UNIFORM GRAPHENE OXIDE FILM