Abstract:Finite Element Method (FEM) and the Statistical Energy Analysis (SEA) are standard methods in the automotive industry for the prediction of vibrational and acoustical response of vehicles. The FE method, based on a deterministic description of the dynamics is typically used for structure-borne and air-borne problems and is usually limited to below 250 Hz. The method becomes prohibitively expensive in terms of computational costs with increasing frequency as more Degrees-of-Freedom (DOF) are required to correctly represent the dynamic response of the structure. Additionally, the dynamic response becomes sensitive to small perturbations in the model, thus defeating the purpose of a deterministic modeling method. SEA is a statistical method widely applied in automotive industry for air-borne problems at frequencies higher than 300 Hz. The method is highly efficient for the design and optimization of sound packages facing airborne sources, but it lacks accuracy when dealing with structure-borne sources in the mid frequency range. However, both methods are not capable of handling the so called "mid frequency problem", where both short and long wavelength components are present in the same system. A Hybrid method has been recently proposed that rigorously couples SEA and FEM. In this work, the HybridFE-SEA method has been used to create fast/efficient model of structure-borne noise in a fully trimmed vehicle from 200Hz to 1 kHz. This paper first describes simple guidelines used to partition the vehicle into stiff components described with FE and modally dense components described with SEA. It is also demonstrated how detailed local FE models can be used to improve SEA descriptions of car panels and couplings. After review of the Hybrid FE-SEA models of a full vehicle that were built, sample experimental validation results of interior Sound Pressure Levels and panel vibration are shown for both bare and fully trimmed vehicle configurations.

Study on prediction of vehicle vibration noise by using SEA method

Investigation of Noise Characteristics of Electric Vibrator Utilizing Acoustic Camera and Transfer Path Analysis

Statistical Energy Analysis for Road Noise Simulation

The Application of Sensitivity Method in Vehicle Dynamics Analysis

A Model for Highway Traffic Noise Prediction Based on the Concept of Equivalent Traffic Flow

Application of Acoustic Transfer Vector Algorithm on Acoustic Radiation for Drive Axle of Automobile

Application of Statistical Energy Analysis Method in Ship Noise and Vibration Control

THE STRUCTURAL VIBRATION ANALYSIS METHOD FOR VEHICLE'S NOISE FACTOR

Prediction and Optimization of Full-Vehicle Road Noise Based on Random Response Analysis

Prediction of aircraft cabin noise by statistical energy analysis

Prediction Method of High Frequency Electromagnetic Noise of Micro Electric Vehicle based on Wavelet Time-Frequency Analysis

Mid Frequency Structure-Borne Noise Modeling in a Trimmed Automotive Vehicle

Research on the Online Measurement of Automobile Engine Speed Based on Vibration Analysis

A framework to predict the airborne noise inside railway vehicles with application to rolling noise

Aerodynamic noise prediction of passenger vehicle with hybrid detached eddy simulation/acoustic perturbation equation method

The Application of Sea in Automobile Dash Sound Transmission Loss Numerical Calculation

A modelling approach for noise transmission through extruded panels in railway vehicles

Acoustic Modelling and Analysis of Vehicle Interior Noise Based on Numerical Calculation

Research on simulation and optimization of vehicle road noise based on random method

Calculation of Full-Spectrum Interior Noise of High-Speed Train with SAEF Method

Sound Insulation Numerical Calculation of an Automobile Magnesium Alloy Dash Based on FE-SEA Hybrid Method