Abstract:Utilizing carbon nanotubes (CNTs) as substitutes for the conventional rigid indium-tin oxide (ITO) electrodes, all CNT based flexible field emission devices (FEDs) were possible to prepare with a novel film transfer method. In the method, both CNT-based flexible cathode and anode were fabricated by first attaching the vacuum filtered CNT film/mixed cellulose eater (MCE) filter membrane to an adhesive semi-cured poly(dimethyl siloxane) substrate, and then peeling off the MCE filter membrane. Effects of bending direction and bending radius on field emission properties were studied. The field emission performance of the convex bending device was worse than that of the flat device and deteriorated further with the decrease of bending radius. In contrast, the concave bending device exhibited better field emission properties than the flat device; nevertheless, its field emission properties decreased as the concave bending radius reduced below a certain value. The method achieved two successes. One is that the interfacial interaction between CNT films and the flexible substrate was greatly enhanced. The other is that the transfer process improved the field emission properties due to the increase of vertically aligned CNT tips. Compared with traditional methods applied in FED preparation, the novel modified transfer method is organic free, easy to control, cheap, and environment friendly.

Fabrication of Aligned Carbon Nanotube Films and Its Field Emission Properties

Growth of Aligned Multiwall Carbon Nanotubes and the Effect of Adsorbates on the Field Emission Properties

Fabrication of Aligned Carbon Nanotubes by a Vapor-phase Deposition Technique and Their Field Emission Properties

Production of Aligned Carbon Nanotube Films and Nitrogen Doped Carbon Nanotube Films from the Pyrolysis of Styrene

Field emission from aligned multi-walled carbon nanotubes

THE GROWTH OF ALIGNED CARBON NANOTUBES ON FeNiCo CATALYST FILMS

Mechanical Fabrication of Carbon Nanotube Films and Their Field-Emission Properties

Fabrication of carbon nanotube field emission film by electrophoresis deposition and sintering

Field emission behavior of aligned carbon nanofiber arrays

All carbon nanotube based flexible field emission devices prepared through a film transfer method

J2240204 Evaluation of the Properties and Alignment of Carbon Nanotube Sheet Grown by CVD Method

Controlling Growth and Field Emission Property of Aligned Carbon Nanotubes on Porous Silicon Substrates

Direct Growth of Horizontally Aligned Carbon Nanotubes Between Electrodes and Its Application to Field-Effect Transistors

Synthesis and Characterization of Carbon Nanotube Grown on Flexible and Conducting Carbon Fiber Sheet for Field Emitter

Formation of Free-Standing Carbon Nanotube Array on Super-Aligned Carbon Nanotube Film and Its Field Emission Properties

Synthesis and Field Emission Study of Large-scaled Aligned Carbon Nanotube Films

Mechanical Fabrication of Carbon Nanotube/tio2 Nanoparticle Composite Films and Their Field‐emission Properties

Vertical Aligned Carbon Nanotubes Grown on Au Film and Reduction of Threshold Field in Field Emission

Microstructure Control of Fe Catalyst Films for the Growth of Multiwalled Carbon Nanotube Arrays

Fabrication of Single-Walled Carbon-Nanotube with Metallic Electrodes

Field Emission from Carbon Nanotube Arrays Fabricated by Pyrolysis of Iron Phthalocyanine