Abstract:A new dual-bandpass 180° hybrid coupler, based on four properly designed shorted-stub loaded stepped-impedance resonators, is proposed in this paper. In order to construct the collaboratively designed coupler/filter, the resonators are coupled magnetically and electrically with each other through three shorted stubs and an open coupled line, respectively. According to the approach of filter synthesis and the derived design equations, the characteristic admittances and electrical lengths of the resonators and coupling sections are determined to achieve the desired resonant frequencies, external Q factors, and internal coupling coefficients for dual passbands. A design procedure is provided. The design flexibilities for ratios of central frequencies and achievable bandwidths are explored. The component shows both filtering and power dividing functions within two specific passbands, whose good performances are demonstrated by the simulated and measured results. The two second-order passbands of a fabricated prototype are located at 2.42 and 5.84 GHz, with 4.6% and 5.2% bandwidths, respectively. The insertion losses are 1.0 and 1.4 dB over 3-dB power division. The isolations are better than 23.5 and 32.8 dB. In both the in-phase and out-of-phase responses, the in-band amplitude and phase imbalances are always within -1.6-0.6 dB and -6.5°-9.5°, respectively.

Tunable Dual-Mode Filtering Power Divider with Harmonic Suppression

AN ELECTRONICALLY TUNABLE DUAL-BAND FILTERING POWER DIVIDER WITH TUNING DIODES SHARING TECHNIQUE

Design of Compact Dual-Mode Dual-Band Filtering Power Divider with High Selectivity

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

Dual-Band Filtering Power Divider Using Dual-Resonance Resonators with Ultrawide Stopband and Good Isolation

Reconfigurable Dual-Band Filtering Power Divider with Ultra-Wide Stopband Using Hybrid Microstrip/Square Defected Ground Structure

Design of Wideband Filtering Power Dividers with Harmonic Suppression Based on the Parallel-Coupled Line Structures

Dual-Band Dual-Mode Dielectric Resonator Filtering Power Divider With Flexible Output Phase Difference and Power Split Ratio

Compact Dual-Band Balanced-to-Unbalanced Filtering Power Divider Design With Extended \textCommon-Mode Suppression Bandwidth

Balanced-to-unbalanced Filtering Power Divider with Compact Size and High Common-Mode Suppression

A Dual-Band Balanced-To-Balanced Power Divider With High Selectivity And Wide Stopband

Design of an ultra-wideband power divider with harmonics suppression

Frequency-Tunable Nonreciprocal SIW Filtering Power Divider Using a Common Resonator With Mixed Static and Time-Modulated Degenerate Modes

Design Method of Dual-Band Wilkinson Power Divider with Designable Length and High Design Freedom

Compact Filtering Power Divider with High Frequency Selectivity and Wide Stopband Using Embedded Dual-Mode Resonator

Design of Filtering Power Divider with High Frequency Selectivity

Harmonic Suppressed Wilkinson Power Divider Using Parallel Resonant Shunt Stub

Miniaturized Wilkinson Power Dividers with Harmonic Suppressions

Design of A Compact Wilkinson Power Divider with High Order Harmonics Suppression

Wideband filtering power divider based on D-CRLH resonator

Synthesis Design of Dual-Band Filtering Power Dividers Based on E-Shape Resonators