Abstract:A new dual-bandpass 180° hybrid coupler, based on four properly designed shorted-stub loaded stepped-impedance resonators, is proposed in this paper. In order to construct the collaboratively designed coupler/filter, the resonators are coupled magnetically and electrically with each other through three shorted stubs and an open coupled line, respectively. According to the approach of filter synthesis and the derived design equations, the characteristic admittances and electrical lengths of the resonators and coupling sections are determined to achieve the desired resonant frequencies, external Q factors, and internal coupling coefficients for dual passbands. A design procedure is provided. The design flexibilities for ratios of central frequencies and achievable bandwidths are explored. The component shows both filtering and power dividing functions within two specific passbands, whose good performances are demonstrated by the simulated and measured results. The two second-order passbands of a fabricated prototype are located at 2.42 and 5.84 GHz, with 4.6% and 5.2% bandwidths, respectively. The insertion losses are 1.0 and 1.4 dB over 3-dB power division. The isolations are better than 23.5 and 32.8 dB. In both the in-phase and out-of-phase responses, the in-band amplitude and phase imbalances are always within -1.6-0.6 dB and -6.5°-9.5°, respectively.

Design of Compact Dual-Mode Dual-Band Filtering Power Divider with High Selectivity

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

Design of compact dual-band quasi-elliptic filter with high selectivity and wide stopband rejection

Compact Dual-Band Balanced-to-Unbalanced Filtering Power Divider Design With Extended \textCommon-Mode Suppression Bandwidth

Dual-Band Dual-Mode Dielectric Resonator Filtering Power Divider With Flexible Output Phase Difference and Power Split Ratio

Design of a Miniaturized Dual-Band Double-Folded Substrate Integrated Waveguide Bandpass Filter with Controllable Bandwidths

Compact Dual-Band Filtering-Response Power Divider with High In-Band Frequency Selectivity

Compact dual-band bandpass filter using asymmetrical dual stub-loaded open-loops

Design of the Filtering Power Divider With Highly-Selective Bandpass Filters

Novel Design of Dual-Band Unequal Wilkinson Power Divider

A Novel Dual-Band Filtering Power Divider with U-section Loaded Resonator

A Dual-Band Balanced-To-Balanced Power Divider With High Selectivity And Wide Stopband

Design of Compact Dual-Band Power Dividers with Frequency-Dependent Division Ratios Based on Multisection Coupled Line

Compact Design of Dual-Band Power Divider with Coupled-Line Shunt Elements

Design of Reduced-Size Unequal Power Divider for Dual-Band Operation with Coupled Lines

High-Selective Bandpass Filters Based on New Dual-Mode Rectangular Strip Patch Resonators

Novel Dual-Band Out-of-Phase Power Divider with High Power-Handling Capability

Wide-Stopband Bandpass-Filtering Power Divider With High-Frequency Selectivity

Synthesis Design of Dual-Band Filtering Power Dividers Based on E-Shape Resonators

Design of n -Way Wideband Filtering Power Dividers With Good Port–Port Isolation

Single- and dual-band filtering-response power dividers embedded SIW filter with improved output isolation