Abstract:Improvement in the in-filed transport properties of REBa2Cu3O7-delta (RE = rare earth elements, REBCO) coated conductor is needed to meet the performance requirements for various practical applications, which can be accomplished by introducing artificial pinning centers (APCs), such as second phase dopant. However, with increasing dopant level the critical current density J(c) at 77 K in zero applied magnetic field decreases. In this paper, in order to improve J(c) we propose a seed layer technique. 5 mol% BaHfO3 (BHO) doped Y0.5Gd0.5Ba2Cu3O7-delta (YGBCO) epilayer with an inserted seed layer was grown on CeO2 buffered ion beam assisted deposition MgO (IBAD-MgO) tape by pulsed laser deposition. The effect of the conditions employed to prepare the seed layer, including tape moving speed and chemical composition, on the quality of 5 mol% BHO doped YGBCO epilayer was systematically investigated by X-ray diffraction (XRD) measurements and scanning electron microscopy (SEM) observations. It was found that all the samples with seed layer have higher J(c) (77 K, self-field) than the 5 mol% BHO doped YGBCO film without seed layer. The seed layer could inhibit deterioration of the J(c) at 77 K and self-filed. Especially, the self-seed layer (5 mol% BHO doped YGBCO seed layer) was more effective in improving the crystal quality, surface morphology and superconducting performance. At 4.2 K, the 5 mol% BHO doped YGBCO film with 4 nm thick self-seed layer had a very high flux pinning force density F-p of 860 GN/m(3) for B//c under a 9 T field, and more importantly, the peak of the F-p curve was not observed. (C) 2018 Elsevier B. V. All rights reserved.

Optimization of BaHfO 3 Doping Concentration as Secondary Phase in Y 0.5 Gd 0.5 Ba 2 Cu 3 O 7− x Thin Film Prepared by Pulsed Laser Deposition

Effect and Mechanism of Doping Concentration on Growth and Performance of Thick BaHfO 3 -Doped Y 0.5 Gd 0.5 Ba 2 Cu 3 O 7− Δ Films by Pulsed Laser Deposition

Formation of Qualified BaHfO3 Doped Y0.5Gd0.5Ba2Cu3O7−δ Film on CeO2 Buffered IBAD-MgO Tape by Self-Seeding Pulsed Laser Deposition

The Influence of Substrate Temperature of Seed Layer on the Structure and Superconducting Property of BaHfO 3 -Doped Y 0.5 Gd 0.5 Ba 2 Cu 3 O 7−δ Film Prepared by Pulsed Laser Deposition

In-field Performance Comparison and Vortex Pinning Analysis in Depth of Pristine and BaHfO 3 -Doped Y 0.5 Gd 0.5 Ba 2 Cu 3 O 7- Δ Films in Different Temperature Regions

Doping Effects In (Ba0.85ca0.15)(Hf0.1ti0.9)O-3 Lead-Free Piezoelectric Ceramics Prepared Via Powder Injection Moulding Using Simple Binder

THE EPITAXIALLY GROWTH AND GD DOPING EFFECT OF YBa2Cu3O7-δ SUPERCONDUCTING THIN FILMS BY LOW-FLUORINE MOD METHOD

Influence of YBiO3-doping on the Superconducting Properties of YBa2Cu3O7−x Films Grown by Non-Fluorine PA-CSD Method

Effect of Y2O3 doping on HfO2 thin film prepared by pulsed laser deposition (PLD): XPS studies

Microstructure and Improved J C – H Characteristic of Sr 2 Nb 2 O 7 -Doped Y 0.5 Gd 0.5 Ba 2 Cu 3 O 7− X Thin Film Prepared by Pulsed Laser Deposition

Jc Enhancement and Flux Pinning in Y1−xGdxBCO and (gd, Eu) Codoped Y0.9−yEuyGd0.1BCO Thin Films by TFA-MOD

Preparation and properties of Y1−xHoxBa2Cu3O7−δ thin films by TFA-MOD method

High Performance GdBa2Cu3O7− Film Preparation by Non-Fluorine Chemical Solution Deposition Approach

Epitaxial Growth of BaHfO3 Buffer Layer and Its Structure Degeneration Analysed by Raman Spectrum.

Yba2cu3o7-Delta Thin-Films with Bao Precipitates

Preparation of Superconducting Yba2cu3o7-X Films on Metallic Substrates by Pulsed Laser Deposition

Chemical Solution Deposition of YBCO Films with Gd Excess

Ag Doping Effects of GdBa2Cu3O7-δFilms by Low Fluorine MOD Method

Ag Doping Effects on Y0.5Gd0.5Ba2Cu3O7−δmultilayers Derived by Low-Fluorine Metalorganic Solution Deposition

Effects of Gd3+ doping on phase compositions, mechanical properties and thermophysical properties of (Yb1-xGdx)4Hf3O12 ceramics

Ferroelectric Properties of Gradient Doped Y2O3:HfO2 Thin Films Grown by Pulsed Laser Deposition