Abstract:Infrared windows such as sapphire, aluminum oxynitride (AlON) and zinc sulfide (ZnS) have excellent optical properties, but restricted for application due to low thermal conductivity (<30 W/m degrees C). Diamond could provide a solution for overcoming the problems due to ultrahigh thermal conductivity (similar to 2000 W/m degrees C). In this paper, a finite element simulation software (ANSYS) was used to simulate the thermal shock behavior of the infrared materials and their composite with diamond coatings (0-0.04 mm in thickness). The performance in an extremely hot environment was simulated by analyzing the thermal distribution, temperature uniformity, and central stagnation temperature. A constant heat flow of 0.5 MW/m2 was applied to investigate the influence of coating thickness on thermal transfer. The results showed that the central stagnation temperatures of the single sapphire and the corresponding composite windows were the lowest. Temperature difference of the windows was mainly determined by the intrinsic thermal parameters, which became narrow with the increase of diamond thickness. Thermal stress and deformation of diamond films and the substrates were calculated and the results indicated that the diamond film can significantly improve the structural stability of these windows. For single diamond windows (1-5 mm in thickness), ultralow central stagnation temperatures of similar to 86-226 &degrees C were ob-tained even at ultrahigh heat flux of 2.0 MW/m2. Diamond film could greatly help to decreasing central tem-perature and improving the thermal uniformity. Related research could provide theoretical reference for the design and application of the "heat free" infrared window.

Rapid Heating Thermal Shock Behavior Study of CVD ZnS Infrared Window Material: Numerical and Experimental Study

Numerical and experimental study on thermal shock damage of CVD ZnS infrared window material

Thermal Shock Damage Behavior of CVD ZnS by Oxygen Propane Flame: A Numerical and Experimental Study

Numerical and Experimental Investigation on Thermal Shock Failure of Y2O3-coated CVD ZnS Infrared Windows

Thermal Shock Performance of CVD Tungsten Coating at Elevated Temperatures

Experiment and Prediction of Crack Spacing of ZnS under Thermal Shock

Influence of Surface Morphology and Microstructure on Performance of CVD Tungsten Coating under Fusion Transient Thermal Loads

Numerical Study of Thermal Shock on Infrared Windows and Their Composites with Diamond Coatings under Harsh Conditions

Numerical Simulation of Aerodynamic Heating and Stresses of Chemical Vapor Deposition ZnS for Hypersonic Vehicles

Cracking Behavior of ZrB2-SiC-Graphite Sharp Leading Edges During Thermal Shock

Thermal-mechanical Response of Microscale Functional Film for Infrared Window

Evaluations of cooling rate and initial temperature on thermal shock behavior of ZrB 2 -SiC ceramic

Thermal Shock Effect on the Glass Thermal Stress Response and Crack Propagation

Numerical Study on Thermal and Stress Responses of an Infrared Functional Window

Thermal shock behavior of ZrB 2 -based sharp leading edges evaluated by a novel water spraying method

Thermal Shock Behavior and Infrared Radiation Property of Integrative Insulations Consisting of MoSi2/borosilicate Glass Coating and Fibrous ZrO2 Ceramic Substrate

Mechanism Analysis of Thermal Shock Properties for Zrb2-20%Sicp-10%Aln Ultra-High Temperature Ceramic with the Surface Defects

Experiments and Transient Finite Element Simulation of Γ-Y2si2o7/b2o3-al2o3-sio2 Glass Coating on Porous Si3N4 Substrate under Thermal Shock

Prediction of Thermal Strain in Diamond-Zinc Sulfide Composite Infrared Windows

Research on Thermal Shock Resistance of ZrB2–SiC–AlN Ceramics Using an Indentation-Quench Method

Multi-phonon interaction of ZnS material based on two-dimensional correlation analysis