Abstract:Infrared windows such as sapphire, aluminum oxynitride (AlON) and zinc sulfide (ZnS) have excellent optical properties, but restricted for application due to low thermal conductivity (<30 W/m degrees C). Diamond could provide a solution for overcoming the problems due to ultrahigh thermal conductivity (similar to 2000 W/m degrees C). In this paper, a finite element simulation software (ANSYS) was used to simulate the thermal shock behavior of the infrared materials and their composite with diamond coatings (0-0.04 mm in thickness). The performance in an extremely hot environment was simulated by analyzing the thermal distribution, temperature uniformity, and central stagnation temperature. A constant heat flow of 0.5 MW/m2 was applied to investigate the influence of coating thickness on thermal transfer. The results showed that the central stagnation temperatures of the single sapphire and the corresponding composite windows were the lowest. Temperature difference of the windows was mainly determined by the intrinsic thermal parameters, which became narrow with the increase of diamond thickness. Thermal stress and deformation of diamond films and the substrates were calculated and the results indicated that the diamond film can significantly improve the structural stability of these windows. For single diamond windows (1-5 mm in thickness), ultralow central stagnation temperatures of similar to 86-226 &degrees C were ob-tained even at ultrahigh heat flux of 2.0 MW/m2. Diamond film could greatly help to decreasing central tem-perature and improving the thermal uniformity. Related research could provide theoretical reference for the design and application of the "heat free" infrared window.

Numerical and experimental study on thermal shock damage of CVD ZnS infrared window material

Thermal Shock Damage Behavior of CVD ZnS by Oxygen Propane Flame: A Numerical and Experimental Study

Numerical and Experimental Investigation on Thermal Shock Failure of Y2O3-coated CVD ZnS Infrared Windows

Rapid Heating Thermal Shock Behavior Study of CVD ZnS Infrared Window Material: Numerical and Experimental Study

Thermal Shock Performance of CVD Tungsten Coating at Elevated Temperatures

Influence of Surface Morphology and Microstructure on Performance of CVD Tungsten Coating under Fusion Transient Thermal Loads

Experiment and Prediction of Crack Spacing of ZnS under Thermal Shock

Numerical Simulation of Aerodynamic Heating and Stresses of Chemical Vapor Deposition ZnS for Hypersonic Vehicles

Thermal-mechanical Response of Microscale Functional Film for Infrared Window

Numerical Study on Thermal and Stress Responses of an Infrared Functional Window

Numerical simulation of thermal radiation effect for plane window in aerodynamic thermal environment

Numerical Study of Thermal Shock on Infrared Windows and Their Composites with Diamond Coatings under Harsh Conditions

Thermal shock behavior of W–ZrC/Sc2O3 composites under two different transient events by electron and laser irradiation

Experiments and Transient Finite Element Simulation of Γ-Y2si2o7/b2o3-al2o3-sio2 Glass Coating on Porous Si3N4 Substrate under Thermal Shock

Thermal Shock Effect on the Glass Thermal Stress Response and Crack Propagation

Evaluations of cooling rate and initial temperature on thermal shock behavior of ZrB 2 -SiC ceramic

Prediction of Thermal Strain in Diamond-Zinc Sulfide Composite Infrared Windows

A Novel Method to Evaluate the Thermal Shock Behavior of ZrB2-SiC-graphite Composites under Alternating Complex Thermal Stress Environments

Cracking Behavior of ZrB2-SiC-Graphite Sharp Leading Edges During Thermal Shock

Transient thermal shock behavior of W–Zr/Sc2O3 composites prepared via spark plasma sintering

Experimental and Numerical Study of Window Glass Breakage with Varying Shaded Widths under Thermal Loading