Abstract:CuGaSe 2 (CGSe) material possesses a wide bandgap of approximately 1.7 eV, making it a promising prospect for top cells in tandem solar cells. Depositing CGSe precursor films by magnetron sputtering of a selenium-rich ceramic target is easy to operate and control. After annealing the precursor films at different temperatures in a selenium-free argon atmosphere, avoiding the use of toxic H 2 Se. To achieve an absorber exhibiting appropriate performance, the morphologies, phase composition, absorption characteristics, roughness, lattice structure, and work function of CGSe absorbers annealed at different temperatures were investigated. The CGSe absorber annealed at 550 °C showed uniform grain, a single-phase composition, high absorbance, flat surface, and compact crystal structure. The absorber annealed at excessive temperature led to the formation of Cu 2-x Se, inducing defects and carrier recombination. The work function of CGSe absorber annealed at 590 °C increases, resulting in the misalignment of its band with the Mo back contact. The enhancement of absorber contributes positively to solar cell device performance. CGSe solar cells prepared using the absorber annealed at 550 °C exhibited excellent photoelectric properties. The increase in minority carrier lifetime and recombination resistance improves the transport characteristics of carriers.

Cu(In,Ga)Se2 thin films annealed with SnSe2 for solar cell absorber fabricated by magnetron sputtering

Effects of Annealing on CuInGaSe2 Solar Cell Prepared by Magnetron Sputtering

Cu(In,Ga)Se-2 Solar Cells Fabricated by Sputtering from Copper-Poor and Selenium-Rich Ceramic Target with Selenium-Free Post Treatment

Preparation of Wide Bandgap CuGaSe2 Absorbers and Solar Cells by Sputtering a Selenium-Rich Ceramic Target and Annealing in a Selenium-Free Atmosphere

Preparation of wide bandgap CuGaSe 2 absorbers and solar cells by sputtering a selenium-rich ceramic target and annealing in a selenium-free atmosphere

ANNEALING STUDIES ON CIGSE PREPARED BY MAGNETRON SPUTTERING

The Effects of Selenium Content on Cu(Inga)Se-2 Thin Film Solar Cells by Sputtering from Quaternary Target with Se-Free Post Annealing

The Effects of Annealing Temperature on CIGS Solar Cells by Sputtering from Quaternary Target with Se-free Post Annealing

10.3%-Efficient Submicron-Thick Cu(In,Ga)Se2 Solar Cells with Absorber Fabricated by Sputtering In2Se3, CuGaSe2 and Cu2Se Targets

Influences of Sulfurization on Performances of Cu(In,Ga)(Se,S)2 Cells Fabricated Based on the Method of Sputtering CIGSe Quaternary Target

Improving the Performance of Solution-Based CZTSSe Absorber by Selenization Annealing with Selenium Powder in Argon

Structure, Morphology, and Photoelectric Performances of Te-Sb<sub>2</sub>Se<sub>3</sub>Thin Film Prepared via Magnetron Sputtering

Structure, Morphology, and Photoelectric Performances of Te-Sb<sub>2</sub>Se<sub>3</sub> Thin Film Prepared via Magnetron Sputtering

Preparing Cu2ZnSnSe4 thin film solar cells based on selenium containing precursors

Influences of Ga Concentration on Performances of CuInGaSe2 Cells Fabricated by Sputtering-Based Method with Ceramic Quaternary Target

Annealing treatment of Cu(In,Ga)Se2 absorbers prepared by sputtering a quaternary target for 13.5% conversion efficiency device

Preparation of Cu(In,Ga)Se2 Thin Film by Sputtering from Cu(In,Ga)Se2 Quaternary Target

Structure, Morphology, and Photoelectric Performances of Te-Sb 2 Se 3 Thin Film Prepared via Magnetron Sputtering.

The Formation Mechanism of Cu(In0.7Ga0.3)Se-2 Nanoparticles and the Densification Trajectory of the Se-Rich Quaternary Target by Hot Pressing

Characterization of Cu(In,Ga)Se2 Films Deposited by Single-Step Electron Beam Evaporation for Solar Cell Applications

The Relationships Between Electronic Properties and Microstructure of Cu(In,Ga)Se-2 Films Prepared by Sputtering from A Quaternary Target