Abstract:As high-performance motors, permanent magnet motors are widely used in a wide range of applications. It has become a consensus to mine reluctance torque in permanent magnet motors. The combination of permanent magnet motors and reluctance motors to generate higher output torque is one of the hotspots in motor research. A dual-rotor motor can be formed by connecting a coaxial connector or a concentric end disk, which can make the motor generate higher torque. However, although the motor torque has been improved, the cogging torque still affects the output torque of the motor. This paper describes a method to reduce the cogging torque of the permanent magnet rotor of the permanent magnet-assisted double rotor motor. By analyzing the motor power equation, it is concluded that the pole arc coefficient, the thickness of the magnetic steel, the length of the air gap, and the slot width of the stator have four influences on the teeth. For the parameters of the slot torque, the upper and lower limits of the parameter value are obtained according to the size of the motor. A certain parameter is taken as a fixed value, and the remaining parameters are uniformly valued. Use parametric scanning to determine the optimal value range of the parameter, and use Maxwell for parameterization. Simulation and analysis show that the cogging torque of the motor is reduced by 90% and the torque ripple is reduced by 50%. In order to simplify the motor control system, this paper designs a fuzzy controller based on granular functions, and the fuzzy rules of the fuzzy controller are to perform feature sampling and fit the response function, eliminating fuzzification and defuzzification, improving the response speed of fuzzy control, and simplifying the control system.

Cogging Torque Reduction in External-Rotor Permanent Magnet Torque Motor Based on Different Shape of Magnet

A Cogging Torque Reduction Method for Surface Mounted Permanent Magnet Motor

Reduction of Cogging Torque in Permanent Magnet Synchronous Motor Using the Taguchi Method

Analysis and Reduction of Detent Force in Permanent Magnet Linear Synchronous Motor

Study of magnet shifting for reduction of cogging torque in permanent magnet motors

Cogging Torque Reduction of Permanent Magnet Motor Based on Particle Swarm Optimization Algorithm

Optimization of the Different Pole Arc Combination to Reduce the Cogging Torque in PMDC Motors

Design and Cogging Torque Reduction of Radial Flux Brushless DC Motors with Varied Permanent Magnet Pole Shapes for Electric Vehicle Application

Design Optimization with Outer Rotor Interior Permanent Magnet Synchronous Motor with Hybird Permanent Magnet

Method for Reducing Cogging Torque Based on Magnet Skewing in Disc-Type Permanent Magnet Motors

Asymmetrical Magnets in Rotor Structure of a Permanent Magnet Brushless DC Motor for Cogging Torque Minimization

Cogging Torque Reduction in Permanent Magnet Flux-Switching Machines by Rotor Teeth Axial Pairing

Research on Cogging Torque Reduction Based on Multi-Parameter Optimization of Auxiliary Slots and Pole-Arc Coefficient

Optimized Design of High Torque Density Permanent Magnet Synchronous Motor with Halbach Magnet

The Evaluation of Optimal Ratio of Outer Diameter to Axial Length on Torque Density for the External Rotor PMSM

Quantitatively Evaluation on the Cogging Torque of Permanent Magnet Motor Caused by Stator and Rotor Defect

Design and Analysis of Outer Rotor Permanent-Magnet Vernier Machines with Overhang Structure for In-Wheel Direct-Drive Application

Cogging Torque Reduction in A Transverse-flux Flux-reversal Permanent Magnet Motor

Research on Cogging Torque Reduction of Direct-Drive Type Dual-Rotor Radial Flux Permanent Magnet Synchronous Motor for Electric Propulsion Aircraft

Optimal design and control of permanent magnet assisted dual rotor motor

Reducing the Cogging Torque of PM Motor by Stator Teeth Notching