A 0.7‐V 7.4‐nW 6.4‐ppm/°C CMOS Subthreshold Voltage Reference With Temperature Compensation Circuit
Jingjing Liu,Yuxuan Huang,Yuchen Wang,Jian Guan,Zhipeng Li
DOI: https://doi.org/10.1002/cta.4378
IF: 2.378
2024-11-28
International Journal of Circuit Theory and Applications
Abstract:This paper proposes a nanowatt voltage reference (VR) with temperature coefficient compensation. A simple temperature compensation circuit is designed to optimize the temperature coefficient at high temperatures, so that the proposed VR circuit can generate a reference voltage with a wider temperature range and a lower temperature coefficient. This paper proposes a nanowatt voltage reference (VR) with temperature coefficient compensation. All transistors work in the subthreshold region. The complementary‐to‐absolute‐temperature (CTAT) voltage and proportional‐to‐absolute‐temperature (PTAT) voltage are mainly generated by two NMOS transistors with different threshold voltages. At the same time, a simple temperature compensation circuit is designed to optimize the temperature coefficient at high temperatures, so that the proposed VR circuit can generate a reference voltage with a wider temperature range and a lower temperature coefficient. The proposed VR circuit is implemented using a standard 0.18‐μm CMOS process with an active area of only 0.022 mm2. The postlayout simulation results show that the proposed VR circuit generates a reference voltage of 308.21 mV at room temperature. Its temperature coefficient is 6.4 ppm/°C over a temperature range of −40°C°C–140°C, with a power consumption of 7.4 nW. The voltage line sensitivity (LS) is 0.098%/V, and the power supply ripple rejection (PSRR) is −72 dB @DC and −42 dB @10 MHz.
engineering, electrical & electronic