Abstract:Lamb wave resonators (LWRs) based on lithium niobate on insulator (LNOI) substrates operating in an A1 mode at frequencies above 5 GHz typically exhibit high electromechanical coupling coefficients (K2) ranging from 20% to 30%. This makes them promising candidates to replace current bulk acoustic wave technology in next-generation broadband RF filters. However, the K2 of conventional LWRs still struggles to meet application requirements for bandwidths exceeding 1 GHz, such as WiFi-6E. This paper presents an analytical optimization approach for rapid and comprehensive scanning of the full 3D Euler space to find the maximum effective K2 of LWR devices. Such a full scan is difficult to achieve by the conventional time-consuming finite element method (FEM). The K2 results for a selected subset of Euler angles obtained through this analytical approach align with FEM simulation results. The optimized results show that LWRs on LNOI can achieve the highest K2 of 59.92% at Euler angles of (0, −151°, −60°), providing bandwidths exceeding 1 GHz at 5 GHz. To validate this optimization approach, LWRs with various orientations were fabricated on both 41° YX-cut and Z-cut LNOI wafers, with measured K2 values at different Euler angles agreeing well with both analytical and FEM results. The proposed K2 optimization method serves as a valuable guideline for selecting substrate cuts and device orientations in the design of ultra-broadband filters for next-generation telecommunications.

A Modified PiBVD Model for LAMB Wave Resonator

Parasitic Analysis and Π-Type Butterworth-Van Dyke Model for Complementary-Metal-oxide-semiconductor Lamb Wave Resonator with Accurate Two-Port Y-parameter Characterizations.

Note: Modified Pi-Type Butterworth-Van Dyke Model For Dual-Mode Lamb-Wave Resonator With Precise Two-Port Y-Parameter Characterizations

Quasi-Static Derived Physically Expressive Circuit Model for Lossy Integrated RF Passives

A derived circuit model for spiral inductors on lossy silicon substrate

An Improved RF MOSFET Model Accounting Substrate Coupling among Terminals

Wideband lumped element model for on-chip (a)symmetrical coupled interconnects on lossy silicon substrate

Modeling of RF Filter Component Based on Film Bulk Acoustic Resonator

Quasi-3D Model for Lateral Resonances on Homogeneous BAW Resonators

Equivalent Circuit Model of On-Wafer Interconnects for Cmos Rfics

Broadband Piston Mode Operation of Solidly Mounted Resonator Employing A1 Lamb Mode on Lithium Niobate

High Electromechanical Coupling Factor Lamb Wave Resonator

Compact Wideband Equivalent-Circuit Model for Electrical Modeling of Through-Silicon Via

An Improved Double-Pi Model For Millimeter Wave Cmos On-Chip Inductor

A Wideband Predictive “Double-$\Pi$ ” Equivalent-Circuit Model for On-Chip Spiral Inductors

Generalised Butterworth-Van Dyke equivalent circuit for thin-film bulk acoustic resonator

A novel wideband 1-π model with accurate substrate modeling for on-chip spiral inductors

An Improved Millimeter Wave MOSFET Model Based on BSIM4

Area Dependence of Effective Electromechanical Coupling Coefficient Induced by On-Chip Inductance in LiNbO3-Based BAW Resonators

Modeling the Piezoelectric Cantilever Resonator with Different Width Layers

Phenomenological Circuit Modeling of Ferroelectric-Driven Bulk Acoustic Wave Resonators