Abstract:Organic/Si hybrid heterojunction hybrid solar cells have got a great progress. The hybrid device may be promising in terms of reducing cost due to its simple technological process. It is crucial for high efficiency solar cells to form better coating films on the Si substrate. Here, the performance of organic/Si heterojunction hybrid solar cells is obviously enhanced by adding surfactant (FS300) into poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) film and the device with amorphous silicon as back surface field is successfully fabricated. The proper amount of surfactant addition improves the uniformity and homogeneous of the polymer film that can be reflected by scanning electron microscope and atomic force microscope, which allows good contact on the texture-Si substrate resulting in excellent device property. Also, the power conversion efficiency of cells is boosted to 9.37 from 7.31% displayed a 28% enhancement by embedding amorphous silicon thin film layer at rear interface as holes blocking layer. The insertion layer of amorphous silicon enhances the extraction of photon-generated carrier and suppresses the recombination of hole–electron at the rear cathode. Which results all improvement in the short-circuit current density, the open-circuit voltage and the fill factor. By optimizing the polymer film property and inserting the hole blocking layer, the performance of hybrid Si/organic hybrid solar cells is greatly improved.

Improving the Organic/Si Heterojunction Hybrid Solar Cell Property by Optimizing Pedot:Pss Film and with Amorphous Silicon As Back Surface Field